https://community.hpe.com/t5/integrity-servers/problems-with-the-mp-console/m-p/4741711#M7236 good afternoon<BR /><BR /> I have a problem which is that I need to place the connection through<BR /> MP in the command is a special character which is the @ but doing this makes it<BR /> skip the line and definitely not allow me to enter the character that is part of the password input to a system console<BR /><BR /> need to know if I have a special way to configure the terminal type I'm using<BR /><BR /> thanks in advance for their support. Thu, 20 Jan 2011 20:30:09 GMT Felix Tabares 2011-01-20T20:30:09Z https://community.hpe.com/t5/integrity-servers/problems-with-the-mp-console/m-p/4741711#M7236 good afternoon<BR /><BR /> I have a problem which is that I need to place the connection through<BR /> MP in the command is a special character which is the @ but doing this makes it<BR /> skip the line and definitely not allow me to enter the character that is part of the password input to a system console<BR /><BR /> need to know if I have a special way to configure the terminal type I'm using<BR /><BR /> thanks in advance for their support. Thu, 20 Jan 2011 20:30:09 GMT https://community.hpe.com/t5/integrity-servers/problems-with-the-mp-console/m-p/4741711#M7236 Felix Tabares 2011-01-20T20:30:09Z https://community.hpe.com/t5/integrity-servers/problems-with-the-mp-console/m-p/4741712#M7237 Please see the HP-UX System Administrator's Guide, Chapter 2, Sub-chapter "Changing Login Special Characters":<BR /><BR /><A href="http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02281490/c02281490.pdf" target="_blank">http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02281490/c02281490.pdf</A><BR /><BR />Pages 39-40.<BR /><BR />MK Thu, 20 Jan 2011 21:55:09 GMT https://community.hpe.com/t5/integrity-servers/problems-with-the-mp-console/m-p/4741712#M7237 Matti_Kurkela 2011-01-20T21:55:09Z https://community.hpe.com/t5/integrity-servers/problems-with-the-mp-console/m-p/4741713#M7238 Once you have logged on, you can use stty(1) to change the control chars. Sat, 22 Jan 2011 10:31:40 GMT https://community.hpe.com/t5/integrity-servers/problems-with-the-mp-console/m-p/4741713#M7238 Dennis Handly 2011-01-22T10:31:40Z https://community.hpe.com/t5/integrity-servers/problems-with-the-mp-console/m-p/4741714#M7239 Use stty(1), that should work<BR /><BR />Regards.<BR />INH Sun, 23 Jan 2011 01:00:12 GMT https://community.hpe.com/t5/integrity-servers/problems-with-the-mp-console/m-p/4741714#M7239 INH 2011-01-23T01:00:12Z