topic Re: Rx4640 System ID problem in Integrity Servers

Rx4640 System ID problem

Jakes Bruwer — Mon, 28 Feb 2011 07:01:48 GMT

Hi,
The rx4640's system batery was replaced.
After the replacement, the system does not want to power up. On the MP console I list the system ID (ID). This displays no current ID information.
The system event log gives a level 2 alert, indicating that it is non critical. Discription indicates "Type_02" event.
I was advised that the system is not powering up because it does not have a system ID.
Can someone please advise what I should do in this situation.

Thanks

Re: Rx4640 System ID problem

Shriniketan Bhagwat — Mon, 28 Feb 2011 08:35:51 GMT

Hi,

Can you please post the session or screen logs. May be help full for the analysis.

Regards,
Ketan

Re: Rx4640 System ID problem

Jakes Bruwer — Mon, 28 Feb 2011 08:41:56 GMT

Hi Ketan,
I'm not currently at the site where the server is located, therefore I don't have access to the MP console.
Unfortunately I can't provide the event log now.

Thanks

Re: Rx4640 System ID problem

Shriniketan Bhagwat — Mon, 28 Feb 2011 08:57:41 GMT

Hi,

Did you notice the error like below.

WARNING AND STOP BOOT INFORMATION

Error[55] : Invalid or inaccessible system ID(s)

Regards,
Ketan

Re: Rx4640 System ID problem

Jakes Bruwer — Mon, 28 Feb 2011 09:18:35 GMT

Hi Ketan,
It is only the event log "System events" that I checked in for a error.
The error you are mentioning did not appear there.

Thanks

Re: Rx4640 System ID problem

Torsten. — Mon, 28 Feb 2011 19:36:27 GMT

Does not power up ...

This means you cannot switch it on?

Any messages in MP log higher than level2?

Re: Rx4640 System ID problem

Jakes Bruwer — Tue, 01 Mar 2011 05:14:01 GMT

Hi,
I did see level 3* messages in the MP event log as well, but nothing higher.

Thanks

Re: Rx4640 System ID problem

Torsten. — Tue, 01 Mar 2011 06:44:52 GMT

If you have access again, consider to attach the messages.

I think the problem is not related to the battery replacement.