https://community.hpe.com/t5/integrity-servers/rx2660-vga-problem/m-p/4795678#M7678 Hi Torsen,<BR /> Thanks for the info, I found the problem I think by default CDE env is not install. After installing it work .<BR /><BR />Regards<BR />Vincent Mon, 06 Jun 2011 22:29:17 GMT Vincent_5 2011-06-06T22:29:17Z https://community.hpe.com/t5/integrity-servers/rx2660-vga-problem/m-p/4795676#M7676 Hi guys, <BR /> Can anyone advice how to enable the VGA on rx2660 in order to see the graphics mode for hpux. I have connected the rx2660 server on a KVM switch which after changing conconfig to VGA I can c the text screen on my LCD but it does to goes to CDe . can someone advice ?<BR /><BR />Regards <BR />Vincent Mon, 06 Jun 2011 05:29:59 GMT https://community.hpe.com/t5/integrity-servers/rx2660-vga-problem/m-p/4795676#M7676 Vincent_5 2011-06-06T05:29:59Z https://community.hpe.com/t5/integrity-servers/rx2660-vga-problem/m-p/4795677#M7677 Make sure CDE is installed and try<BR /><BR />Check /etc/dt/config/Xservers.<BR />If last line is commented out as follows:<BR /><BR /># * Local local@console /usr/bin/X11/X :0<BR /><BR />remove '# ' and restart dtlogin:<BR /><BR /># /sbin/init.d/dtlogin.rc stop<BR /># /sbin/init.d/dtlogin.rc start<BR /><BR /><BR /><BR /><BR />Don't use VGA as console, because you can no longer access it via MP! Mon, 06 Jun 2011 07:09:16 GMT https://community.hpe.com/t5/integrity-servers/rx2660-vga-problem/m-p/4795677#M7677 Torsten. 2011-06-06T07:09:16Z https://community.hpe.com/t5/integrity-servers/rx2660-vga-problem/m-p/4795678#M7678 Hi Torsen,<BR /> Thanks for the info, I found the problem I think by default CDE env is not install. After installing it work .<BR /><BR />Regards<BR />Vincent Mon, 06 Jun 2011 22:29:17 GMT https://community.hpe.com/t5/integrity-servers/rx2660-vga-problem/m-p/4795678#M7678 Vincent_5 2011-06-06T22:29:17Z