https://community.hpe.com/t5/integrity-servers/pdhc-dmd-clock-failed/m-p/4799712#M7717 <!--!*#-->Server went down (rx7640), was up for 11 days. In ILO, had to power on the cabinet, powered it on thru the console. Log showed it came up, then it went down again with error message "PDHC_DMD_CLOCK_FAILED." I am new to this older partition server. Has anyone seen this error? Have any suggestions? I cannot find anything at any location for this error. Fri, 17 Jun 2011 19:07:43 GMT Shirley Weir 2011-06-17T19:07:43Z https://community.hpe.com/t5/integrity-servers/pdhc-dmd-clock-failed/m-p/4799712#M7717 <!--!*#-->Server went down (rx7640), was up for 11 days. In ILO, had to power on the cabinet, powered it on thru the console. Log showed it came up, then it went down again with error message "PDHC_DMD_CLOCK_FAILED." I am new to this older partition server. Has anyone seen this error? Have any suggestions? I cannot find anything at any location for this error. Fri, 17 Jun 2011 19:07:43 GMT https://community.hpe.com/t5/integrity-servers/pdhc-dmd-clock-failed/m-p/4799712#M7717 Shirley Weir 2011-06-17T19:07:43Z https://community.hpe.com/t5/integrity-servers/pdhc-dmd-clock-failed/m-p/4799713#M7718 Hi,<BR /><BR />It sounds like a CELL, CELL Power or PDHC hardware issue, but you'll likely need to log a service call. <BR /><BR />Can you connect to the MP serail console and get the SEL and FPL logs? If you can post them maybe someone here can help isolate the problem. <BR /><BR />Rgds,<BR /><BR /><BR /><BR /><BR />Rgds,<BR /><BR /><BR /> Fri, 17 Jun 2011 19:34:37 GMT https://community.hpe.com/t5/integrity-servers/pdhc-dmd-clock-failed/m-p/4799713#M7718 cnb 2011-06-17T19:34:37Z