topic Re: Can´t work in console using MP connection in Integrity Servers

Can´t work in console using MP connection

uadm26 — Tue, 20 Jun 2006 06:52:42 GMT

Hi,

I have a Itanium system, and have to ways to connect, IP and serial, I enter in MP, but when I try to login into console by the command CO, theres no login prompt just that line:

------------ Live Console ----------------
And nothing more happens, seems hung up.

Can you help? Thanks.

Re: Can´t work in console using MP connection

Ludovic Derlyn — Tue, 20 Jun 2006 07:32:32 GMT

Hi,

I have encountered this problem also on itanium server

- Check if network cable is correct
- Halt and restart Servers (power off -power on) seems resolve the problem

An other cases has been posted, check it :

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1034412

regards

L-DERLYN

Re: Can´t work in console using MP connection

RAC_1 — Tue, 20 Jun 2006 07:51:02 GMT

Login with ip and check if console processes is running or not. If not restart it. init q should start it.

If console process is running, then try resetting GSP. (soft reset should do it.)

Re: Can´t work in console using MP connection

Geoff Wild — Tue, 20 Jun 2006 09:02:37 GMT

I think you need to go into the EFI Boot Maintenance Manager, then select the "Console Input Devices".

Rgds...Geoff

Re: Can´t work in console using MP connection

Darrel Louis — Tue, 20 Jun 2006 09:37:31 GMT

Hi Joel,

From the MP console, try type CO and ctrl-E cf.

Can you check the event/log, you need to navigate through the error logs to find errors. You could do this by entering SL (event logs) and CL for console logs.

Darrel

Re: Can´t work in console using MP connection

uadm26 — Tue, 20 Jun 2006 09:41:38 GMT

Thanks for all, but Geoff Wild God bless you.

Re: Can´t work in console using MP connection

uadm26 — Tue, 20 Jun 2006 10:03:05 GMT

thanks for all.