https://community.hpe.com/t5/integrity-servers/console-path-on-rx7620/m-p/3486479#M844 I installed an A6869A VGA/USB card in an rx7620 and tried to add it to the console path. Apparently I accidentally removed the MP from the path because now I get no console output from any device. Since I cannot see the EFI menu I can't change it back. Is there a way to restore my previous values, or reset them?<BR />TIA Tue, 15 Feb 2005 17:09:18 GMT Ron Groves 2005-02-15T17:09:18Z https://community.hpe.com/t5/integrity-servers/console-path-on-rx7620/m-p/3486479#M844 I installed an A6869A VGA/USB card in an rx7620 and tried to add it to the console path. Apparently I accidentally removed the MP from the path because now I get no console output from any device. Since I cannot see the EFI menu I can't change it back. Is there a way to restore my previous values, or reset them?<BR />TIA Tue, 15 Feb 2005 17:09:18 GMT https://community.hpe.com/t5/integrity-servers/console-path-on-rx7620/m-p/3486479#M844 Ron Groves 2005-02-15T17:09:18Z https://community.hpe.com/t5/integrity-servers/console-path-on-rx7620/m-p/3486480#M845 Hi Ron,<BR /><BR /><A href="http://www.docs.hp.com/en/A7027-96013/A7027-96013.pdf" target="_blank">http://www.docs.hp.com/en/A7027-96013/A7027-96013.pdf</A><BR /><BR />Page 41, on the core io card there is a mp reset button.<BR /><BR />Hope this helps,<BR />Robert-Jan Wed, 16 Feb 2005 06:54:11 GMT https://community.hpe.com/t5/integrity-servers/console-path-on-rx7620/m-p/3486480#M845 Robert-Jan Goossens 2005-02-16T06:54:11Z