topic Re: rx3600 sas controller error in Integrity Servers

rx3600 sas controller error

Cristinel_Calugarita — Wed, 17 Jan 2007 11:38:30 GMT

hy all,

I have a rx3600 with hpux 11.23.
I get periodically a disk error in syslog(here is attached an EMS output).

I've made pathcment assessment. Also I have applied the last fw upgrate and now I have the following versions: System 01.32, BMC 05.07, and iLO2 MP F.01.41.

Thank you in advance.
Cristinel

Re: rx3600 sas controller error

Sameer_Nirmal — Wed, 17 Jan 2007 14:25:57 GMT

Do you know the firmware version on the SAS controller?
Check using sasmgr command.

What is the driver version (SerialSCSI-00 ) of the controller?

check using swlist command.

Refer these links as well.
http://h20293.www2.hp.com/portal/swdepot/displayInstallInfo.do?productNumber=SerialSCSI-00

http://docs.hp.com/en/AB463-9001A/ch09s02.html?btnNext=nextÂ Â»

Re: rx3600 sas controller error

Cristinel_Calugarita — Thu, 18 Jan 2007 05:45:14 GMT

Hy,

Thank you very much for your answer.
The firmware revision of the hba is 1.10.1.0
Here are some outputs about sas ctrl config.

get_info

Driver Name : sasd
Bundle Version : B.11.23.01
Product Number : 399490-001
Hardware Path : 0/4/1/0
Health of HBA : ONLINE
PCI Vendor ID : 0x1000
PCI Device ID : 0x0054
PCI Subsystem Vendor ID : 0x3228
PCI Subsystem ID : 0x103c
PCI Revision ID : 0x0000
Max. PHYs supported : 8
Max. IO size : 1048576

*********************************************************************
***** HBA Specific information *****
*********************************************************************
HBA state : READY
Driver firmware dump available : NO
Driver firmware dump timestamp : N/A
Firmware Revision : 1.10.1.0

get_info RAID

Thu Jan 18 12:18:45 2007

---------- PHYSICAL DRIVES ----------
LUN dsf SAS Address Enclosure Bay Size(MB)

/dev/rdsk/c1t2d0 0x500000e012b57b32 1 5 70007

---------- LOGICAL DRIVE 2 ----------

Raid Level : RAID 1
Volume sas address : 0x58edfb6c444dbb
Device Special File : /dev/rdsk/c1t7d0
Raid State : OPTIMAL
Raid Status Flag : ENABLED
Raid Size : 69504
Rebuild Rate : 20.00 %
Rebuild Progress : 100.00 %

Participating Physical Drive(s) :

SAS Address Enc Bay Size(MB) Type State

0x500000e012b37722 1 3 70007 SECONDARY ONLINE
0x500000e012b33e42 1 4 70007 PRIMARY ONLINE

---------- LOGICAL DRIVE 5 ----------

Raid Level : RAID 1
Volume sas address : 0x569e876cae95036
Device Special File : /dev/rdsk/c1t4d0
Raid State : OPTIMAL
Raid Status Flag : ENABLED
Raid Size : 69878
Rebuild Rate : 0.00 %
Rebuild Progress : 100.00 %

Participating Physical Drive(s) :

SAS Address Enc Bay Size(MB) Type State

0x500000e012b452b2 1 8 70007 SECONDARY ONLINE
0x500000e012b57f82 1 7 70007 PRIMARY ONLINE

---------- GLOBAL SPARE DRIVES ----------
SAS Address Enc Bay Size(MB) Pool State

0x500000e012b33df2 1 6 70007 0 ACTIVE

Re: rx3600 sas controller error

Cristinel_Calugarita — Thu, 18 Jan 2007 06:03:16 GMT

here is the driver version:

SAS-SASD B.11.23.02.01 PCI-X SerialSCSI

Thank you very much,
Cristinel

Re: rx3600 sas controller error

Andrew Merritt_2 — Thu, 18 Jan 2007 14:44:05 GMT

Hi Cristinel,
It's a known problem with the disk_em monitor and the SAS disk array on rx3600, rx6600 and rx2660. You can safely ignore those events for that device. The monitor should not be reporting events for the IR Volume, which is not a physical device.

You can hide the events by use of the disabled_instances file. See my response in http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=405726 for how to do this. The path you'll need in your case is /storage/events/disks/default/0_4_1_0.0.0.7.0

This will be fixed in a future patch.

Andrew

Re: rx3600 sas controller error

Sameer_Nirmal — Thu, 18 Jan 2007 14:54:11 GMT

Make sure that you have latest firmware and driver installed as well.

Just get the firmware of the SAS controller upgraded to 1.16. The firmware and the update utility could be obtained from IPF diagnostics s/w available at

IPF Diagnostics
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3257032&prodTypeId=15351&prodSeriesId=3257031&swLang=13&taskId=135&swEnvOID=54

Firmware upgrade procedure

http://docs.hp.com/en/AB463-9001A/ch09s02.html?btnNext=nextÃ Â Ã Â»

Update the SAS driver to SASD B.11.23.03.01
Latest SAS driver at

http://h20293.www2.hp.com/portal/swdepot/displayInstallInfo.do?productNumber=SerialSCSI-00

Check and download CommonIO bundle

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=CommonIO

Re: rx3600 sas controller error

Andrew Merritt_2 — Fri, 19 Jan 2007 04:19:11 GMT

Sameer is right to recommend the latest firmware and drivers, though it won't actually make a difference in this case, which is due to the defect in the disk_em monitor. If you have ITRC access, you can see the details under JAGag25112.

The fix will be in PHSS_35807 which is scheduled for release by the end of this month. Until then you can either ignore the events or use the work-around given of using disabled_instances.

Andrew

Re: rx3600 sas controller error

Cristinel_Calugarita — Fri, 19 Jan 2007 04:36:16 GMT

Hy all,

Thank you for your help. I've installed the latest drivers and FW but the error remains.

I'll wait till the end of this month for the patch.
Thank you again.

Best regards,
Cristinel

Re: rx3600 sas controller error

Cristinel_Calugarita — Fri, 19 Jan 2007 04:48:02 GMT