rx3600 SAS CONTROLLER

Luk Vandenbussche — Fri, 26 Jan 2007 06:54:14 GMT

Hi,

I have here an rx3600 with integrated SAS controller. I installed HPUX 11.23 succesfully, but i receive the error that I haven't the good SerialSCSI driver. I installed it and also tried to update the firmware of the controller. Here something got wrong.

So I reinstalled HP-UX, it worked fine but i cannot boot the OS any more.

Here is the output off map -r (I just see my DVD)

fs0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0)
blk0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)
blk1 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0)

fs0:\EFI\HP\TOOLS\IO_CARDS\SAS> cfggen 0 status
LSI Logic SAS Raid Configuration Utility v1.00.08.00
Background command progress status for controller 0...
IR Volume 1
Current operation : None
Volume ID : 5
Volume status : Enabled
Volume state : Optimal
Physical disk I/Os : Not quiesced

fs0:\EFI\HP\TOOLS\IO_CARDS\SAS> cffgen 0 display
'cffgen' not found
Exit status code: Invalid Parameter

fs0:\EFI\HP\TOOLS\IO_CARDS\SAS> cfggen 0 display
LSI Logic SAS Raid Configuration Utility v1.00.08.00
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS1068
EFI BSD version : 2.00.14.00
Firmware version : 1.16.00.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 112
Maximum physical devices : 62
Concurrent commands supported : 511
Slot : Unknown
Bus : 20
Device : 1
Function : 0
RAID Support : Yes
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
IR volume 1
Volume ID : 5
Status of volume : Okay (OKY)
RAID level : 1
Size (in MB) : 69878
Physical hard disks (Target ID) : 9 6
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #112
Target on ID #6
Device is a Hard disk
Enclosure # : 1
Slot # : 7
Target ID : 6
State : Online (ONL)
Size (in MB)/(in sectors) : 70007/143374738
Manufacturer : HP
Model Number : DG072A8B54
Firmware Revision : HPD6
Serial No : 3LB19BRM00009720EV9J
Drive Type : SAS
Target on ID #9
Device is a Hard disk
Enclosure # : 1
Slot # : 8
Target ID : 9
State : Online (ONL)
Size (in MB)/(in sectors) : 70007/143374738
Manufacturer : HP
Model Number : DG072A8B54
Firmware Revision : HPD6
Serial No : 3LB19LCJ00009719EBKP
Drive Type : SAS
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 500605B0:002D9820
Numslots : 8
StartSlot : 1
Start TargetID : 0
Start Bus : 0

Re: rx3600 SAS CONTROLLER

rick jones — Mon, 29 Jan 2007 12:48:01 GMT

I've no idea that this would be involved, but...

Did you install from HWE (HardWare Enablement) media, or just some pseudo-random 11.23 media you had?

Firmware on the controller - do you mean then that you have the SAS SmartArray controller in the system? If so, IIRC that is not supported by 11.23 - only the "dumb" SAS controller is supported by HP-UX at this time. The SAS SmartArray is supported by Linux (and perhaps Windows)

When you boot, does some banner about P600 Option ROM appear? If so, then your system has a SAS SmartArray controller.

Re: rx3600 SAS CONTROLLER

Luk Vandenbussche — Wed, 07 Feb 2007 09:57:51 GMT

It was a firmware issue.
The server returned to a HP office to solve this problem.

topic Re: rx3600 SAS CONTROLLER in Integrity Servers

rx3600 SAS CONTROLLER

Re: rx3600 SAS CONTROLLER

Re: rx3600 SAS CONTROLLER