topic Re: MP is not responding after 3 missing passwords of Admin in Integrity Servers

MP is not responding after 3 missing passwords of Admin

Luis Antonio Sanchez R — Fri, 26 Jan 2007 14:35:07 GMT

How can I re-enable the mp console?

Re: MP is not responding after 3 missing passwords of Admin

Fritz Hummel — Sat, 27 Jan 2007 11:13:08 GMT

Hi

hp Integrity and hp 9000 Integrated Lights-Out Management Processor Operations Guide
.....
There are three ways to reset passwords in the MP:
1. In the UC command, change individual users or reset all users to default values.
2. In the DC command choose â Reset Security Configurationâ .
3. Forgotten passwords can be reset by pressing the MP reset button on the back panel of your HP Server.
After the MP reboots, the local console terminal displays a message for five seconds. Responding to this
message in time will allow a local user to reset the passwords.
NOTE All user information (logins, passwords, and so on) is erased using methods 1, 2, or 3.

Re: MP is not responding after 3 missing passwords of Admin

Luis Antonio Sanchez R — Mon, 29 Jan 2007 12:26:41 GMT

Yes, I can reset the passwords, I did 3 times, and now I know that if I change the password of Admin, then I canÂ´t login. And I am sure the password is right. Are there problems for changing the default password?

Re: MP is not responding after 3 missing passwords of Admin

Luis Antonio Sanchez R — Mon, 29 Jan 2007 13:18:39 GMT

The problem was solved typing slow the password