topic Re: Setting console on a rx2600 in Integrity Servers

Setting console on a rx2600

Bruno Bossier_1 — Tue, 01 Jul 2003 13:14:30 GMT

I have some trouble setting the correct console on a rx26000 Itanium server. There is a VGA display (hp1825) and a USB keyboard connected to it and I would like to use those as the console (so doing ctrl B, seeing the flow of all POST and other messages, ....). This does not work although I thought I selected the correct input, output and standard error devices :

Output & Error = Acpi(HWP0002,700)/Pci(2|0)
Input = Apci(HWP0002,0)/Pci(1|1)

Should everything be deconnected from the management card and the serial ports or is there another problem ?

Thanks,
Bruno

Re: Setting console on a rx2600

Marco Hogeveen — Thu, 07 Aug 2003 06:28:20 GMT

Bruno,

The POST messages cannot be seen from the VGA screen. VGA BIOS is initialized at the end of POST (after a minute or so).
So you do not do anything wrong, POST messages can only be viewed from the console port.

Marco.

Re: Setting console on a rx2600

JiangMingJun — Tue, 23 Sep 2003 21:58:14 GMT

when you see the 10seconds disconnect ,you can disturb it,and choose the boot path,then you can use "boot -vga",so youcan see it.
try !
luck!

Re: Setting console on a rx2600

JiangMingJun — Tue, 23 Sep 2003 21:58:28 GMT

when you see the 10seconds disconnect ,you can disturb it,and choose the boot path,then you can use "boot -vga",so youcan see it.
try !
luck!

wiseking