topic Re: rx4640 invalid model string...need help in Integrity Servers

rx4640 invalid model string...need help

psyduck™ — Tue, 03 Apr 2007 00:51:07 GMT

Hello...
I have some problem /w rx4640.
After replacement of system board,
rx4640 server does not display correct model string.
And this causes firmware upgrade to fail...

Here's command results.

-----------------------------------------------
CCBS1# model

ia64 hp
CCBS1#
CCBS1# uname -a

HP-UX CCBS1 B.11.23 U ia64 3086252423 unlimited-user license
-----------------------------------------------

How can I change the model string to rx4640??

Thank you.

Re: rx4640 invalid model string...need help

Sameer_Nirmal — Tue, 03 Apr 2007 02:47:20 GMT

Check the server "Product Name" showing in EFI shell using
Shell> sysset

It should show "server rx4640" in your case. You can set the product name using
Shell> sysset prodname server rx4640

After that BMC board need to be reset. Power down the server and unplug power for 20 secs or so and then power it on.

Re: rx4640 invalid model string...need help

mits — Wed, 04 Apr 2007 03:20:31 GMT

You need to enclose the product name with the double quotation mark like below.

Shell> sysset prodname "server rx4640"

Re: rx4640 invalid model string...need help

psyduck™ — Fri, 06 Apr 2007 03:39:51 GMT

Thank you for your help...

I'll schedule a job..

Thanks again.