https://community.hpe.com/t5/integrity-servers/alternate-boot-path-in-itanium/m-p/3014785#M87 Hi guys,<BR /><BR />I have a rx5670 pre-installed with hpux I64 on one disk. With the system up, I managed to extend vg00 and mirror all lvols into the new disk. Created the boot LIF with mkboot (standard commands for hpux). The problem is when I reboot the system in order to test the new disk, I cannot configure it to boot from an alternate path. Does anyone have an idea how this is done? I'm used to PDC, not to this new stuff (EFI).<BR /><BR />Thanks in advance,<BR /><BR />Ricardo Thu, 03 Jul 2003 15:02:44 GMT Ricardo Rocha 2003-07-03T15:02:44Z https://community.hpe.com/t5/integrity-servers/alternate-boot-path-in-itanium/m-p/3014785#M87 Hi guys,<BR /><BR />I have a rx5670 pre-installed with hpux I64 on one disk. With the system up, I managed to extend vg00 and mirror all lvols into the new disk. Created the boot LIF with mkboot (standard commands for hpux). The problem is when I reboot the system in order to test the new disk, I cannot configure it to boot from an alternate path. Does anyone have an idea how this is done? I'm used to PDC, not to this new stuff (EFI).<BR /><BR />Thanks in advance,<BR /><BR />Ricardo Thu, 03 Jul 2003 15:02:44 GMT https://community.hpe.com/t5/integrity-servers/alternate-boot-path-in-itanium/m-p/3014785#M87 Ricardo Rocha 2003-07-03T15:02:44Z