topic Re: problem with mp port rx8640 in Integrity Servers

problem with mp port rx8640

pedliz11 — Thu, 03 Jan 2008 13:29:07 GMT

we had a problem with an mp port --could not access via ip or serial connection.. We had to power down the whole server with all of it's vpars to reset this port.. Is there any firmware upgrades that fix this? and or patches? pl let me know n Thanks for your help

Re: problem with mp port rx8640

Jeeshan — Thu, 03 Jan 2008 13:42:55 GMT

just power up the server. not to start server. then try to connect to MP with serial cable.

Re: problem with mp port rx8640

pedliz11 — Thu, 03 Jan 2008 14:03:18 GMT

tried that did not work

Re: problem with mp port rx8640

Steven E. Protter — Thu, 03 Jan 2008 14:30:25 GMT

Shalom,

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductRoot.jsp?lang=en&cc=il&taskId=135

If there is firmware for your box it should be installed regardless of this problem.

I suspect the MP port is dead. Hardware issue. Contact HP support for replacement. these things do happen once in a while.

SEP

Re: problem with mp port rx8640

Jacques Carriere — Fri, 04 Jan 2008 15:18:00 GMT

Any green lights on the MP adapter? If not, you may have a problem.

The following command might help...

#stty +resetGSP

Jacques

Re: problem with mp port rx8640

pedliz11 — Mon, 14 Jan 2008 16:56:34 GMT

everything worked