topic Re: rx2620 in Integrity Servers

rx2620

Jon Steele — Fri, 25 Jan 2008 19:47:01 GMT

Hi,

I am taking out the base cpu which is AB335A and I am putting in an AD123A. My machine works fine with the AB335A but when I put in the AD123A I get a processor error and it will not boot up.I have tried 2 different procs and I get the same error.I think I may have 2 bad procs because I have done this before with out any problems.I just wanted to run this by all of you incase I am missing something.

Thanks
Jon

Re: rx2620

Sameer_Nirmal — Fri, 25 Jan 2008 21:07:25 GMT

And what that processor error is?

Can you post the MP SL errors and FPL and firmware versions?

Re: rx2620

rick jones — Sat, 26 Jan 2008 01:47:41 GMT

How new are these AD123A's, and how long ago was it when you last swapped-in AD123A's?

Re: rx2620

mits — Sun, 27 Jan 2008 02:56:28 GMT

The system firmware revision should be 3.17A or later.
Did you check the firmware version? MP>SR command reports it. See web doc, http://docs.hp.com/en/AD117-9009A/ch01s06.html#d0e759 .

The current firmware revision is 04.27. Can you anyway provide us your error message or MP SL entries that have the alert level bigger than 3? I am curious to know what error the system reports.

Re: rx2620

Jon Steele — Thu, 31 Jan 2008 19:23:19 GMT

Thanks for all of your help.My firmware was fine.The problem was I had 2 bad procs.Once I got in another one evrything worked fine.

Thanks
Jon