topic Re: rx8640 console access in Integrity Servers

rx8640 console access

rp3440 — Sat, 14 Jun 2008 16:23:23 GMT

Hello every body,
I am new to HP world, We have new setup with rx8640 boxes and i would like to power on the machine. Any body please help.

Thanks

Re: rx8640 console access

Asif Sharif — Sat, 14 Jun 2008 16:34:35 GMT

Hi rp3440(Server Model) -:),

Is your server connected to a source
of AC power. The AC power must be checked for the proper voltage before the system is powered
up?

Regards,
Asif Sharif

Re: rx8640 console access

rp3440 — Sat, 14 Jun 2008 16:43:37 GMT

Hi Asif,

Thanks for your quick response. Yes my team ensured me that power is available and industrial sockets are connected with server.

Re: rx8640 console access

Asif Sharif — Sat, 14 Jun 2008 16:55:56 GMT

Follow this procedure to power on your server.

1. Connect one end of a null modem cable (9-pin to 9-pin) to the RS-232 Local port on the core I/O card

2.Connect the other end of the RS-232 cable with your notebook.

3.Before powering up the server cabinet for the first time:

--> Verify that the AC voltage at the input source is within specifications for each server cabinet being installed.

4. To power on the MP, set up a communications link, and log in to the MP:

Apply power to the server cabinet.

On the front of the server, the MP Status LED will illuminate yellow until the MP is booted successfully. Once the MP is booted successfully, and no other cabinet faults exist, the LED will change to solid green.

5. Log in to the MP: Enter Admin at the login prompt. (This term is case-sensitive.)

It takes a few moments for the MP> prompt to appear. If the MP> prompt does not appear, verify that the laptop serial device settings are correct: 8 bits, no parity, 9600 baud, and None for both Receive and Transmit. Then try again.

Enter Admin at the password prompt. (This term is case-sensitive.)

The MP Main Menu is displayed

CM>PS and see the power status If every thing seems ok then CM>PE and power on the server.

Regards,
Asif Sharif

Re: rx8640 console access

rp3440 — Sat, 14 Jun 2008 17:11:24 GMT

Hi Asif,

I am stuck on CM>PE...Kindly help to tell me step by step to power on the machine.

Re: rx8640 console access

Asif Sharif — Sat, 14 Jun 2008 17:14:40 GMT

Hi again,

See Booting the Server.
http://docs.hp.com/en/AB297-9013A/ch03s10.html

Regards,
Asif Sharif

Re: rx8640 console access

rp3440 — Sat, 14 Jun 2008 17:43:27 GMT

Thanks a lot Asif, Really excellent support provided by this great forum.