topic Re: Query regarding MP in Integrity Servers

Query regarding MP

vinayan — Wed, 23 Jul 2008 11:35:00 GMT

Can Anybody help me to find out Management Processor IP address from Operating system

server model rx 2620

OS ver HP UX 11.23

Rgds
Vinayan

Re: Query regarding MP

Torsten. — Wed, 23 Jul 2008 11:37:26 GMT

Best way to get the MP address is to connect via serial cable and read/set it from there.

Default setting for new machines is DHCP (see label on chassis).

Some models can report the MP IP address via system management homepage - have a look there.

http://:2301

Re: Query regarding MP

YAQUB_1 — Wed, 23 Jul 2008 15:25:01 GMT

The MP LAN must be configured through DHCP, a ping command from another machine on the network, or from the MP serial connection. For information on how to configure the MP LAN, refer to the HP Integrity and HP 9000 Integrated Lights-Out Management Processor Operations Guide at
http://docs.hp.com/en/5971-4274_iLO_ops/5971-4274_iLO_ops.pdf.

By default, the MP LAN uses DHCP to retrieve a new LAN address for itself if the firmware version on the MP is E.03.13 or newer. When this occurs, the default hostname is set to â mpâ .

The MAC address for the MP LAN is found on the rear of the machine or on the iLO Manageability Card. If DDNS (Dynamic DNS) is enabled in the datacenter, the DNS server automatically registers the new name and
enables you to reach the MP through the web browser at URL: â https://mp/â , or through telnet at hostname â mpâ .

For example, if the MAC address is 00306e22b403, the URL would be: https://mp00306e22b403/.

BR/
Yaqub

Re: Query regarding MP

vinayan — Fri, 25 Jul 2008 09:57:12 GMT

This thread can be closed