topic Re: problem with booting BL860 blade integerity server in Integrity Servers

problem with booting BL860 blade integerity server

vz7r1x — Fri, 27 Mar 2009 20:01:55 GMT

gurus,

I am physically conected to BL860 via terminal and I can get to "shell" prompt. Few commands I tried are:
-map
blk0: (i tried blk1 blk2 also)
hpux
boot vmunix

I tried using doc at http://docs.hp.com/en/B2355-90950/ch05s01.html#bjadedgh

but it is not helping, I am stuck at shell>. I am new to it also.

Does someone have command sequence so I can get into my unix server?
I am assuming it is preloaded with HPUX11i.

Thanks

Re: problem with booting BL860 blade integerity server

Tim Nelson — Fri, 27 Mar 2009 20:07:56 GMT

Unless you see an fs#: then the EFI does not see any bootable devices.

Maybe the problem exists with the assumption that this is pre-loaded with HPUX ?

You can probably navigate to one or both block devices and look at the contents but if you can not list an EFI directory I would bet that the disk(s) have are blank.

Insert HPUX install DVD and start an install.

Re: problem with booting BL860 blade integerity server

vz7r1x — Fri, 27 Mar 2009 20:16:50 GMT

Hi Tim,

Deos it have to start with fs#:

If that is the case I will have to install OS.
Thx

Re: problem with booting BL860 blade integerity server

vz7r1x — Fri, 27 Mar 2009 21:04:15 GMT

Hi,
I ran into another problem. I have a DVD-ROM attached now and I can see it when I run map command.

When I put HP-UX 11i V1 core OS cd in DVDROM and run install command at blk3: prompt, it does not work, error says "Invalid parameter" and "install not found".

Can you shed some light on it?

Re: problem with booting BL860 blade integerity server

Torsten. — Mon, 30 Mar 2009 03:19:25 GMT

Hi,

you cannot use HP-UX 11i V1 on this server, you need a current version of

HP-UX 11i V2 or HP-UX 11i V3.

Re: problem with booting BL860 blade integerity server

vz7r1x — Tue, 07 Apr 2009 13:22:08 GMT

i had a few issues stopping me from installation:
1. BL860 did not come with HP-UX installed.
2. DVDROM I had was not compatible with HPUX so OS installation was not possible.

Thanks