https://community.hpe.com/t5/windows-server-2003/ads-automated-deployment-service/m-p/3417574#M1256 Hi, i tried to use ADS to imaging my W2K3 server. I run ADS on a HP ML350 with Raid 5 (First test) and Raid 0 (second test) The problem is with the stage that the image is ready to be captured, in that on the ADS console the job fails with Failed to open volume with an event id of c1001003. Our system partition (disk o partition 1) is on raid5 on 10GB disks (first test) and 3GB disk (second test). Any help would be greatly appreciated. <BR /><BR />Thanks<BR />Andre Drouin Mon, 08 Nov 2004 16:10:53 GMT Andre Drouin_1 2004-11-08T16:10:53Z https://community.hpe.com/t5/windows-server-2003/ads-automated-deployment-service/m-p/3417574#M1256 Hi, i tried to use ADS to imaging my W2K3 server. I run ADS on a HP ML350 with Raid 5 (First test) and Raid 0 (second test) The problem is with the stage that the image is ready to be captured, in that on the ADS console the job fails with Failed to open volume with an event id of c1001003. Our system partition (disk o partition 1) is on raid5 on 10GB disks (first test) and 3GB disk (second test). Any help would be greatly appreciated. <BR /><BR />Thanks<BR />Andre Drouin Mon, 08 Nov 2004 16:10:53 GMT https://community.hpe.com/t5/windows-server-2003/ads-automated-deployment-service/m-p/3417574#M1256 Andre Drouin_1 2004-11-08T16:10:53Z