topic Re: Windows 2003 RIS HP 6120 in Windows Server 2003

Windows 2003 RIS HP 6120

ionut_lascu — Wed, 12 Apr 2006 03:50:08 GMT

Hi
During setup of a RIS install, I get the following message:

"File b57w2k.sys cuased an unexpected error (21) at line 3737 in
d:\xpclient\base\boot\setup\setup.c"
At this point the install fails.
Has anyone seen this problem before and if so any explanations/solutions?

Thanks.

Re: Windows 2003 RIS HP 6120

Arch_Muthiah — Wed, 12 Apr 2006 11:43:46 GMT

Try copy the Windows 2000 version of the drivers (B57W2K.SYS) to the Windows 2003 installation source folder and the setup information file (B57WIN32.INF).

For the BC570x issues, a Windows User Group article which discusses integration of Intel and Broadcom drivers with RIS images suggests rewriting the B57WIN32.INF file to replace all references to B57W2K.SYS with 2003 files, but Intel suggests to install PRO/100 or PRO/1000 NICs via RIS.

Archunan

Re: Windows 2003 RIS HP 6120

Arch_Muthiah — Wed, 12 Apr 2006 11:51:15 GMT

This too may be usefull...
http://www.msfn.org/board/index.php?s=54aaa00f7e3d544099fada25a2272a6a&showtopic=27884

Archunan

Re: Windows 2003 RIS HP 6120

ionut_lascu — Fri, 14 Apr 2006 04:09:29 GMT

My Ris server si Windows 2003 Server
I put b57w2k.sys to i386 folder of my image, and in to the Nic folder and i get the same error.

I already see this link http://www.msfn.org/board/index.php?s=54aaa00f7e3d544099fada25a2272a6a&showtopic=27884 and nothing change.

Please help.