https://community.hpe.com/t5/windows-server-2003/system-drive/m-p/4072457#M4548 No. Probably, if you haven't already done, you should move the pagefile.sys file to another disk partition. You can change this from system properties. Wed, 19 Sep 2007 09:18:28 GMT Ivan Ferreira 2007-09-19T09:18:28Z https://community.hpe.com/t5/windows-server-2003/system-drive/m-p/4072456#M4547 When my 2003 server was installed the system volume was only given 7 gb and not made dynamic. I am now running out of space and have 267GB unallocated. I do not want different partitions and would like to add the 267GB to the system partition. Is there an easy way to do this or is it a rebuild? Wed, 19 Sep 2007 02:15:42 GMT https://community.hpe.com/t5/windows-server-2003/system-drive/m-p/4072456#M4547 kingsfords 2007-09-19T02:15:42Z https://community.hpe.com/t5/windows-server-2003/system-drive/m-p/4072457#M4548 No. Probably, if you haven't already done, you should move the pagefile.sys file to another disk partition. You can change this from system properties. Wed, 19 Sep 2007 09:18:28 GMT https://community.hpe.com/t5/windows-server-2003/system-drive/m-p/4072457#M4548 Ivan Ferreira 2007-09-19T09:18:28Z https://community.hpe.com/t5/windows-server-2003/system-drive/m-p/4072458#M4549 What about using Microsoft's Diskpart utility? Microsoft KB 325590 -- <A href="http://support.microsoft.com/kb/325590" target="_blank">http://support.microsoft.com/kb/325590</A><BR />It looks like it may or may not work on the system partition. And it looks like you may need to move the system page file to a different volume first.<BR /><BR />Of course, when doing things to your system disk, be sure to get a full, VERIFIED backup first! Fri, 21 Sep 2007 11:06:21 GMT https://community.hpe.com/t5/windows-server-2003/system-drive/m-p/4072458#M4549 Sheldon Smith 2007-09-21T11:06:21Z