topic Re: CPQTeamMP error in Windows Server 2003

CPQTeamMP error

henrik hjorth — Tue, 06 Nov 2007 08:56:43 GMT

Hi i got this error in the event log
Server: Proliant DL385 G1
PSP 7.90
Firmware 7.90

I have a Team on 2 NIC and a Trunk in the switch (HP 3500 yl)
Team Type Selection:
Switch-assisted Load Balancing with fault tolerance (SLB)
in HP nic software one of the NIC hat the status of Failed (Tx Path)

if i reboot, i works fine for some time
How d i get rid of this error

Event Type: Warning
Event Source: CPQTeamMP
Event Category: None
Event ID: 435
Date: 06-11-2007
Time: 01:55:06
User: N/A
Computer: SILKEBORG17
Description:
HP Network Team #1: PROBLEM A Standby Network Link is not transmitting correctly. ACTION: Please check your cabling or switch port status, or run diagnostics to test card. Also make sure all teamed NICs are on the same network.
Data:

/henrik

Re: CPQTeamMP error

KarloChacon — Tue, 06 Nov 2007 20:08:11 GMT

hi

my first question would be it is just the error on event viewer or also are you loosing connection?

PSP 7.9 does not include the latest Network Configuration Utility it includes 8.7. can you install 8.8 and recreate the teaming
http://h18023.www1.hp.com/support/files/server/us/download/27943.html

just a silly question did you already check cables and so on?

I also found this
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1156174

but I think is portfast:
spanning-tree portfast

regards

Re: CPQTeamMP error

KarloChacon — Tue, 06 Nov 2007 20:09:33 GMT

the second link again

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1156174

regards

Re: CPQTeamMP error

henrik hjorth — Thu, 08 Nov 2007 05:49:38 GMT

Hi

I have now upgraded
cp007937.exe (HP Network Configuration Utility 8.80.0.0)
cp008064.exe (HP NC-Series Broadcom Driver 10.42.0.0)
but with no luck.
ItÂ´s an error in the eventlog,i an not loosing connection, because itÂ´s a Team. In NCU there is a red cross over one of the NIC.
New cables CAT6
You said, enable Port feature on switch port.
Its a Procurve 3500yl, where do i enable this, is it via telnet?
I also have a Trunk of 2 ports in the switch going to the 2 Teamed NIC.

Regards
henrik

Re: CPQTeamMP error

graham fraser — Tue, 20 Nov 2007 04:02:33 GMT

hi,
we have just had the same problem this morning, exactly the same in the event log, but it dropped the link to our file and printer server for nearly 8 hours until someone was in the office to reboot the server.

Has anyone had any success in resolving this?

thanks.

Re: CPQTeamMP error

admito — Tue, 08 Apr 2008 13:54:54 GMT

We've had the same problem in two production servers, and everything points to the teaming type, that was set to "Automatic". No problem in the other 30 servers, same model (bl460c) with PSP driver versions from 7.60 to 8.00, and configured as "Network Fault Tolerance Only".

Tomorrow morning we'll change the teaming type; will post here if problem persists.

This docs helped us:
ftp://ftp.compaq.com/pub/products/servers/networking/TeamingWP.pdf
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00287087/c00287087.pdf

Regards

Re: CPQTeamMP error

Paul Mountcastle — Tue, 07 Jul 2009 17:47:18 GMT

Will changing the team type to NFT cause a drop in connectivity?