topic Re: HP Nic Teaming Util problems. in Windows Server 2003

HP Nic Teaming Util problems.

Spacetrucker — Thu, 03 Apr 2008 02:01:03 GMT

ProLiant GL5; Windows 2003 R2

How do you determine what version you have?
I believe I have version 9, I updated with the latest version available in Feb.08.
I also updated the nic firmware and drivers to the latest version available in Feb.08.

How do you remove the the app? I want to reinstall it.
It's not listed in Add/Remove Programs.

Problem: Attempted to team the nic's, the routine says it completed succesfully. But, no team is listed in the app, when I select the nic's and go to the Information tab it tells me the nic is not teamed. But a Lan3 connection is created, and it's labeled as HP Team#1. And, it running at 2 gbps, and I can assign ip addresses to it.

Re: HP Nic Teaming Util problems.

Igor Karasik — Thu, 03 Apr 2008 09:55:04 GMT

>>How do you determine what version you have?

Open HP Network config utility from Control Panel or from system tray. You will see version info (right-click -> About HP network)

>>How do you remove the the app?https://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=902099

Re: HP Nic Teaming Util problems.

Spacetrucker — Thu, 03 Apr 2008 15:07:17 GMT

The app on the problem server is screwed up. I don't get the splash page with the version info when I open the app. I have it installed on another server and the version is 9.00.0.14 according to the splash page. I used cp008241 to install on both servers.

Following the info in the link you provided I'm going to delete the nics, reboot, let the o/s rediscover the nic's, update the firmware on the nic's "cp008245", update the nic drivers "cp008280", reinstall the team util "cp008241" team the nic's.

If anyone see's a problem with what I plan to do this evening after 5 pm cst please let me know.