Teaming problem

matteo tg — Mon, 22 Dec 2008 02:57:09 GMT

I have some problem regarding NIC teaming.

DL580 G5
Windows 2003 stn installed.

Onboard HP NC373i Multifunction Gigabit Server Adapter * 2EA
Drive version 3.4.10.0
drive date: 2007-05-25

I have tried a teaming for above NICs using HP teaming utility.
Created newly teaming interface.
i did setting an ip address on newly teaming NIC. but didn't work.

when i run a HP Teaming utility again, NICs didn't teaming.

rebooed server, above problem still on.

following is System event error ID
-----------------------------------
CPQTeamMP
ID:148\
TeamMember ID: 1
PROBLEM: This Teaming Protocol-Edge Configuration Parameters section of the Reg
istry has an Invalid, illegal or unsupported, value for the LcdRssCapsCapabiliti
esFlags Parameter. Setting value to 0. ACTION: No action is required if the Defa
ult behavior is acceptable. Otherwise, reconfigure the LcdRssCapsCapabilitiesFla
gs value or reconfigure the team.

CPQTeamMP
ID:50
TeamMember ID: 0
PROBLEM: This Teaming Protocol-Edge Configuration Parameters section of the Reg
istry is either missing the LcdRssParmsIndirectionTable Parameter, or the Parame
ter is unreadable. Setting value to 0. ACTION: No action is required if the Defa
ult behavior is acceptable. Otherwise, reconfigure the LcdRssParmsIndirectionTab
le value.

Any help would be appreciated.

Thanks,

matteo

topic Re: Teaming problem in Windows Server 2003

Teaming problem

Re: Teaming problem