topic Re: Possible False Alarm on battery attached to Array Controller P400 in Windows Server 2003

Possible False Alarm on battery attached to Array Controller P400

Pablo Sánchez — Sat, 29 May 2010 22:14:25 GMT

Hi all,

I have a PROLIANT DL380 G5 with an Array Controller P400 firmware version 5.26 and I recently installed PSP version 7.91A.
OS installed is Windows 2003 Ent Ed.
There are lots of Widows event logs like these ones:
Event Type: Warning
Event Source: Storage Agents
Event Category: Events
Event ID: 1204
Date: 28.05.2010
Time: 20:36:50
User: N/A
Computer: ILLEMACTX05
Description:
Drive Array Accelerator Status Change. The array accelerator board attached to the array controller in Slot 1 has a new status of 4.
(Accelerator status values: 1=other, 2=notConfigured, 3=enabled, 4=tmpDisabled, 5=permDisabled)
[SNMP TRAP: 3038 in CPQIDA.MIB]

Then …

Event Type: Warning
Event Source: Storage Agents
Event Category: Events
Event ID: 1206
Date: 28.05.2010
Time: 20:36:50
User: N/A
Computer: ILLEMACTX05
Description:
Drive Array Accelerator Battery Failed. The array accelerator board attached to the array controller in Slot 1 is reporting a battery failure.
[SNMP TRAP: 3040 in CPQIDA.MIB]
Data:

And then…

Event Type: Information
Event Source: Storage Agents
Event Category: Events
Event ID: 1204
Date: 28.05.2010
Time: 22:06:50
User: N/A
Computer: ILLEMACTX05
Description:
Drive Array Accelerator Status Change. The array accelerator board attached to the array controller in Slot 1 has a new status of 3.
(Accelerator status values: 1=other, 2=notConfigured, 3=enabled, 4=tmpDisabled, 5=permDisabled)

According with the HP System Management Home page there are no errors on the battery, my question is how can I stop these false alarms?

Re: Possible False Alarm on battery attached to Array Controller P400

Shayne Heidemann — Mon, 31 May 2010 00:12:10 GMT

Hi.

The first message occurs because the battery isn't charged (tmp disabled). This will contnue to notify you until you get to the second message.

The second message occurs when the charge is completed and the array is cacheing(Enabled).

Unless this is continually changing state, there isn't a problem.

Cheers
Shayne

Re: Possible False Alarm on battery attached to Array Controller P400

Pablo Sánchez — Mon, 31 May 2010 14:37:03 GMT

Hi Shayne,
Thanks for your reply, but actually the problem is that these alarms are been generated one per day so they are continually changing state.

Any help with this would be really appreciated!

Regards,
Pablo

Re: Possible False Alarm on battery attached to Array Controller P400

Igor Karasik — Mon, 31 May 2010 19:30:50 GMT

Hi,
It is not normal behavior
Your P400 firmware version is very old
Try to update to last firmware 7.18
http://tinyurl.com/2ba3cke

I suggest to update PSP to 8.40 as well

If it is not help - open call and HP will replace board

Re: Possible False Alarm on battery attached to Array Controller P400

Pablo Sánchez — Mon, 31 May 2010 20:34:41 GMT

Ok Iâ ll try that and Iâ ll let you know!

Thanks Igor!