topic Re: 2003 install locks up on ML370 in Windows Server 2003

2003 install locks up on ML370

Andy Niemeier — Tue, 20 Apr 2004 16:08:47 GMT

I have an older ML370 (800mhz model) that I am trying to install 2003 server onto from scratch. I booted off the smart start cd and erased the system and created my array. When I boot off the 2003 cd to start the install, the machine keeps locking up right after it loads all the drivers. I never make it past this point. I have updated the system firmware to the latest version with no luck.

Any ideas????

Re: 2003 install locks up on ML370

Ganesh Babu — Tue, 20 Apr 2004 16:17:07 GMT

u wanna check this..

http://support.microsoft.com/?kbid=823728

Ganesh

Re: 2003 install locks up on ML370

Andy Niemeier — Tue, 20 Apr 2004 16:21:47 GMT

The microsoft fix is for systems that already have 2003 installed. I am unable to even load 2003 on my server. Like I stated earlier, the setup program keeps locking up after the initial default drivers load.

Re: 2003 install locks up on ML370

Venkatesan_3 — Wed, 21 Apr 2004 06:31:09 GMT

Hope this works for u, as i already faced this type problem when all my drivers are loaded the setup programs gets hanged,i checked everything but finally the culprit is Ram.

Venkatesan

Re: 2003 install locks up on ML370

Thomas Bianco — Wed, 21 Apr 2004 08:16:55 GMT

Have you tried loading the manufacturer driver during setup with f6?
We had a server that was having similar behaviour for 2000, we discovered that the setup program was loading an old, 40% compatible array driver from Microsoft and causing the system to hang. We threw in the array driver floppy at setup time and loaded that driver and it ran fine.

Re: 2003 install locks up on ML370

Andy Niemeier — Wed, 21 Apr 2004 12:41:54 GMT

I figured out the problem. I needed to update the firmware on the Smart Array 221 controller card. Everything is working great now.