topic Re: array driver change DL360G3 -> G4 Windows Server 2003 in Windows Server 2003

array driver change DL360G3 -> G4 Windows Server 2003

Tobias Uchtmann — Tue, 29 May 2007 03:35:14 GMT

Dear Sirs,

we have an old dl360g3 with an installation of windows server 2003.
We will change the hotplug hdd to a new dl360g4p hardware.
The problem is the installed array driver from windows server 2003.
dl360g3 has an array 5i controller and g4p has an 6i controller.

Is there a workaround to change the array driver with the rescue console
so that the windows server 2003 will start with the new hardware.

Re: array driver change DL360G3 -> G4 Windows Server 2003

Igor Karasik — Tue, 29 May 2007 04:50:54 GMT

Hi,
See these threads
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1127457
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1107866

Re: array driver change DL360G3 -> G4 Windows Server 2003

Tobias Uchtmann — Tue, 29 May 2007 06:12:31 GMT

Hi,

have you the controller regkey witch I must import?

Re: array driver change DL360G3 -> G4 Windows Server 2003

Igor Karasik — Tue, 29 May 2007 06:22:36 GMT

Hi,
The reg file attached in Steven message in this thread:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=947370

Re: array driver change DL360G3 -> G4 Windows Server 2003

Tobias Uchtmann — Tue, 29 May 2007 08:43:29 GMT

year, funzt.
thx

Re: array driver change DL360G3 -> G4 Windows Server 2003

Tobias Uchtmann — Tue, 29 May 2007 08:44:20 GMT

thx

Re: array driver change DL360G3 -> G4 Windows Server 2003

Igor Karasik — Tue, 29 May 2007 12:10:54 GMT

Tobias, for future - since you are new on this forum - read read:http://forums1.itrc.hp.com/service/forums/helptips.do?#22