topic Re: Alpha DS-20 Installation Problem in Operating System - Tru64 Unix

Alpha DS-20 Installation Problem

dhananjay_1 — Sun, 19 Jun 2005 02:48:34 GMT

Hello !
We are trying to install Compaq TRU64 Version 3.0,4.0D,5.0 on alpha Server DS-20 while installation it gives the following Error.
BootStrap Address Collision,Image Loading aborted
Halted CPU 0
HaltCode = 5
Halt Instruction executed
PC=200104f0

Firmware Version is 6.3-1

Can anybody help me to sortout this issue .

Regds
Dhananjay

Re: Alpha DS-20 Installation Problem

Johan Brusche — Sun, 19 Jun 2005 04:39:02 GMT

In console mode look for

P00>>>show console_memory_allocation

To work around the bootstrap address collision do:

P00>>>set console_memory_allocation old

For more detail check:
h30097.www3.hp.com/docs/patch/50/bl15/ReleaseNotes.pdf

__ Johan

Re: Alpha DS-20 Installation Problem

dhananjay_1 — Sun, 19 Jun 2005 06:06:18 GMT

Johan ,
Thanks for quick response,Problem Has been solved ,I am very new to this. Now I have completed the installation.
I have two disk in my system dsk0 and dsk1( 18gb each)in dsk 0 I have createed three partition i.e. a,b and g each 1 gb ,now I want to create three more partitions on the same disk but it is now allowing me to do that .it gives overlapping error.
So how to make partitions ...pls help me

Thanks & regards
Dhananjay

Re: Alpha DS-20 Installation Problem

Michael Schulte zur Sur — Sun, 19 Jun 2005 17:09:41 GMT

Hi,

you can change non open partition by disklabel -e dsk0
Partitions do have an offset and a length and are not allowed to overlap, otherwise the data would be corrupted.
You are using a,b and g so far.
You could adjust parition d or e
The usual disk label has 8 oartitions from a-h.
You can see them with disklabel -r dsk0 for example.

greetings,

Michael

Re: Alpha DS-20 Installation Problem

Ralf Puchner — Mon, 25 Jul 2005 04:07:45 GMT

first check if the versions are supported on that kind of hardware. Older versions of Tru64 (called Digital Unix or OSF/1 depending on version) doesn't support new hardware.

Have a look into the hardware compatibility list of the ds20.