https://community.hpe.com/t5/operating-system-tru64-unix/active-ccb-at-time-of-error/m-p/3731787#M16192 cam_logger: cam_error packet<BR />cam_logger: bus 2 target 3 lun 0<BR />cdisk_op_spin<BR />start unit failed<BR />hard error detected<BR />compaq bb00911ca0 3b05<BR />active ccb at time of error<BR /><BR />=============================<BR />please help with explanation of what this all means Wed, 15 Feb 2006 03:42:00 GMT Mike Cousins 2006-02-15T03:42:00Z https://community.hpe.com/t5/operating-system-tru64-unix/active-ccb-at-time-of-error/m-p/3731787#M16192 cam_logger: cam_error packet<BR />cam_logger: bus 2 target 3 lun 0<BR />cdisk_op_spin<BR />start unit failed<BR />hard error detected<BR />compaq bb00911ca0 3b05<BR />active ccb at time of error<BR /><BR />=============================<BR />please help with explanation of what this all means Wed, 15 Feb 2006 03:42:00 GMT https://community.hpe.com/t5/operating-system-tru64-unix/active-ccb-at-time-of-error/m-p/3731787#M16192 Mike Cousins 2006-02-15T03:42:00Z https://community.hpe.com/t5/operating-system-tru64-unix/active-ccb-at-time-of-error/m-p/3731788#M16193 Mike,<BR /><BR />This means that the drive, located on bus2 target 3, couldn't be started by the OS.<BR />A "Start Unit" command is send to bring the drive online (spinup, etc..)<BR />The drive is not reporting it is UP, within the timeout period.<BR />Maybe it will be ready afterwards, or probably it is completely dead.<BR /><BR />Anyway, this is an HW-related problem.<BR /><BR />Joris Wed, 15 Feb 2006 07:38:12 GMT https://community.hpe.com/t5/operating-system-tru64-unix/active-ccb-at-time-of-error/m-p/3731788#M16193 Joris Denayer 2006-02-15T07:38:12Z