KZPCC - Component missing

A.W.R — Wed, 22 Jul 2009 14:05:09 GMT

Hi,

We have just replaced a KZPCC controller on an AlphaServer ES45 with Tru64UNIX.

When we started up the system, the RAID controller saw all the disk drives, but also reported a "component missing" for a particular disk drive bay. This disk drive bay does not have a disk drive installed, and has never had a disk drive installed.

The RAIDset has come up, but it is in a degraded state.

Is it possible to fix this problem without having to rebuild the whole RAIDset?

Thanks
Andrew

Re: KZPCC - Component missing

Pieter 't Hart — Thu, 23 Jul 2009 06:38:59 GMT

the "component missing" statement probably comes from a previous configuration where this controller was used.

afaik the kzpcc stores it's raid-config in NVRAM.
You'll have to match the existing configuration and write it in nvram.
this does not neccesarily mean rebuilding the whole RAIDset.

I suggest you clear the KZPCC's config before attaching it to the disks.
then power-down, attach disks and power-on.
After this it may even detect itself the curent configuration and you have the chance to update the NVRAM with the current disk configuration without losing data.

topic KZPCC - Component missing in Operating System - Tru64 Unix

KZPCC - Component missing

Re: KZPCC - Component missing