topic check net settings in Operating System - Tru64 Unix

check net settings

lawrenzo — Wed, 21 Nov 2007 11:37:20 GMT

Hello,

can someone tell me the best commands for troubleshooting and setting the NIC in tru64.

I know the basic commands such as ifconfig, netstat, ping etc.

The issue I have is that a server has been rebooted and the backup's are running 10 times slower.

I have checked the card settings in /var/adm/messages

and the card started with:

Nov 18 11:27:51 cgcu087a vmunix: alt1: 1000 Mbps full duplex Link Up via autonegotiation

basically i would like to know how to display and change the media speeds

Thanks

Chris.

NB. I have run some tests between 2 systems and do notice a dramitic difference to the pr

Re: check net settings

Ivan Ferreira — Wed, 21 Nov 2007 14:37:03 GMT

You can check with:

hwmgr get attr -cat network

And change it with lan_config command, see man lan_config for more information.

Re: check net settings

Kapil Jha — Thu, 22 Nov 2007 00:05:04 GMT

>>>Backup is running 10 times slower
i suppose u are not taking backup on tape...
How are u taking backup.....
any changes done in the system....
if u feel its about LAN your complete syatem should be slow....whenever it is interecting outside....
You may try restart network.
#rcinet restart

Any more observation you have...

BR,
Kapil

Re: check net settings

lawrenzo — Fri, 23 Nov 2007 07:06:49 GMT

Thanks chaps

found out that a cpu was down.