topic Re: Creating New file system Using Extra Disk in Operating System - Tru64 Unix

Creating New file system Using Extra Disk

Paul Stanard — Fri, 27 Feb 2004 16:24:55 GMT

Is is possible to say create a new file system with a few unlabeled disk so that I can users data on it?

Re: Creating New file system Using Extra Disk

Michael Schulte zur Sur — Fri, 27 Feb 2004 18:39:20 GMT

Hi,

you can put a disklabel on each disk and create a file domain on each, you can start a file domain on one disk and use addvol to add the other disks or you could combine several disks into one by the hsz70.

greetings,

Michael

Re: Creating New file system Using Extra Disk

Paul Stanard — Sun, 29 Feb 2004 18:21:57 GMT

I guess my real question is since my file systems is advfs and I do not have the lm pack to create another advfs file domain so a.) should i just add the disks to the present file domains or
b.) should I /can I create a ufs file domain with the remaining disks? Will the two different domains be able to interact?

I tried creating a file domain (data_domain) using sysman but I was unsuccessful in adding a volume to it, so I deleted it.

Re: Creating New file system Using Extra Disk

Paul Stanard — Sun, 29 Feb 2004 18:32:35 GMT

Maybe I should just add the disks to the root domain and load the data on root? Its about 13GB. What do you think Mike/Ralf?

Re: Creating New file system Using Extra Disk

Michael Schulte zur Sur — Sun, 29 Feb 2004 18:57:46 GMT

Hi,

did you add the rest of the licenses to the system? Can you post lmf after doing that?
How much space do you need for the data in one spot.
If you do not need it all in one spot, you can also create a domain on each disk.
How many disks do you have attached to the hsz70?

Michael

Re: Creating New file system Using Extra Disk

Ralf Puchner — Mon, 01 Mar 2004 03:12:46 GMT

to add more than one disk to a volume you need the "advfs utilities" license. Another approach is to use a raid controller or LSM, but LSM requires also an license.

Since Tru64 future is counted, buy a license which is the cheapest and easiest way.

Re: Creating New file system Using Extra Disk

Michael Schulte zur Sur — Mon, 01 Mar 2004 04:48:08 GMT

Hi,

one alternative. Since the commands, like addvol and rmvol are rarely used, if you have another machine with an advfs-utilities license, consider to temporarely transfer a license.

Michael

Re: Creating New file system Using Extra Disk

Ravi_8 — Mon, 01 Mar 2004 05:30:33 GMT

Hi,

by labelling those disks you can create new file systems.

#diskconfig
allows you to label the disk
(here i assume it as dsk2a)

#mkfdmn /dev/disk/dsk2a test
#mkfset test test_fs
#mount -t advfs test#test_fs

make an entry in /etc/fstab

Re: Creating New file system Using Extra Disk

Paul Stanard — Mon, 01 Mar 2004 09:41:57 GMT

# ./lmf list
Product Status Users: Total Active

OSF-BASE active unlimited
OSF-BASE active, multiple unlimited
OSF-BASE active, multiple unlimited
OSF-BASE active, multiple unlimited
OSF-BASE active, multiple unlimited
OSF-BASE active, multiple unlimited
OSF-BASE active, multiple unlimited
OSF-SVR active unlimited
OSF-USR active unlimited

Re: Creating New file system Using Extra Disk

Paul Stanard — Mon, 01 Mar 2004 10:02:28 GMT

1.)Labeled dsk5
2.)added addl lm packs

# cd /usr/sbin
# ./addvol /dev/dsk/dsk5c usr_domain

ERROR: This application will not run successfully unless it is used
on the processor(s) on which it is licensed. The licensed processor(s)
is the one on which the product requiring the PROD_ADV PAK
will execute. An ADVFS-UTILITIES PAK must be registered in the License
Database and activated in the kernel cache before this application
will run. Refer to the installation guide for the product requiring
the ADVFS-UTILITIES PAK for license database PAK registration instructions.

Re: Creating New file system Using Extra Disk

Michael Schulte zur Sur — Mon, 01 Mar 2004 10:57:24 GMT

Paul,

you have to temporarely transfer a advfs-utilities license from another host and install it on that machine and delete it after that. I hope, you have that somewhere?
Do you know how to programme the hsz70?
There you could add the disks into one volume too.

Michael

Re: Creating New file system Using Extra Disk

Paul Stanard — Mon, 01 Mar 2004 11:45:22 GMT

I do not have any other box with an advfs utilities licenes. No I have never programmed the hsz70. I guess I am stuck !!!

Re: Creating New file system Using Extra Disk

Paul Stanard — Mon, 01 Mar 2004 12:02:30 GMT

I think I have LSM installed? Could that help me?

Re: Creating New file system Using Extra Disk

Michael Schulte zur Sur — Mon, 01 Mar 2004 12:12:54 GMT

Paul,

you may have lsm installed, but for certain things you need an extra lsm license, which according to your last lmf list, you don't have. Have you looked for an advfs-utilties license? If you don't have one, we can try to programme the hsz70.

Michael

Re: Creating New file system Using Extra Disk

Paul Stanard — Mon, 01 Mar 2004 12:23:11 GMT

lets programm the hsz70 because I dont have anymore license paks

Re: Creating New file system Using Extra Disk

Michael Schulte zur Sur — Mon, 01 Mar 2004 12:59:24 GMT

Paul,

first I want to have the current configuration of the hsz70 subsystem.
hwmgr -show scsi
/usr/lbin/hsxterm5 -b X -t X -l X
just take one of the hsz70 disks.
Then post as attachment.
show this full
show disk full
show mirror full

thanks,

Michael

Re: Creating New file system Using Extra Disk

Paul Stanard — Mon, 01 Mar 2004 14:10:24 GMT

Not sure I clearly understand what you are advising me to do. An example would be nice (dsk5). I am still relatively new to the OS. Thanks
just take one of the hsz70 disks.
Then post as attachment.
show this full
show disk full
show mirror full

Re: Creating New file system Using Extra Disk

Paul Stanard — Mon, 01 Mar 2004 14:23:36 GMT

Hold on I think I have it...

Re: Creating New file system Using Extra Disk

Paul Stanard — Mon, 01 Mar 2004 14:28:25 GMT

See attachment Mike

Re: Creating New file system Using Extra Disk

Michael Schulte zur Sur — Mon, 01 Mar 2004 14:29:25 GMT

Paul,

hsxterm5 is a programme to access the command line interface(cli) of the hsz70

You call hsxterm5 -b x -t x -l x
b=bus, t=target, l=lun
in your case for example
41: 5 AlphaServe disk none 2 1 dsk4 [1/3/0]
hsxterm5 -b 1 -t 3 -l 0
Once you have the prompt, type these commands and post the asa attachment:
show this full
show disk full
show mirror full

I assume, dsk4-8 are free to use?

Michael

ps. You still didn't answer, how much space do you need for user data in one place?
Are there files bigger than one disk or do the data have to be in one directory?