topic Re: CMOS battery-Alphaserver DS10 in Operating System - OpenVMS

CMOS battery-Alphaserver DS10

Deepak Raheja — Wed, 22 Sep 2010 05:33:00 GMT

Sir,

When I am booting my Alphaserver DS10 a message is coming “INVALID SYSTEM TIME” .After entering into BIOS setup it is showing CMOS Battery problem and advices to replace the same. Unfortunately I am unable to search the CMOS battery on my motherboard. Could anybody help me to give some clue to replace the battery.

Thanks in advance

Regards,
Deepak Raheja

Re: CMOS battery-Alphaserver DS10

Ian Miller. — Wed, 22 Sep 2010 14:42:40 GMT

curiously the battery is not listed as a replacement part for the DS10.

Is there a Dallas RTC chip?

Re: CMOS battery-Alphaserver DS10

Khee Chan — Thu, 23 Sep 2010 15:27:35 GMT

Deepak,

Please refer to ITRC thread # 1256015 (http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1256015) and Hoff's web page on the subject (http://labs.hoffmanlabs.com/node/441).

I have a step by step procedure to replace the offending part (the Dallas RTC chip) but the file is at home and not with me. I can provide the info later.

Khee

Re: CMOS battery-Alphaserver DS10

Deepak Raheja — Thu, 23 Sep 2010 16:16:02 GMT

Thanks Chan,

I could get only the following details

http://www.hp-store.com/PD_07720.aspx

Prom, PTN 256K CMOS SERIAL OTP 3.3v (SROM) 23-034V7-00

But I am unable to see the physical location on board...

Regards,
Deepak Raheja

Re: CMOS battery-Alphaserver DS10

abrsvc — Fri, 24 Sep 2010 15:21:52 GMT

Take off the top cover of the DS10 and locate the fan in the front. Just behind the fan is a large black plastic covered pc board and just behind that you should see a rectangular part marked "DALLAS" on it. That is the RTC that needs to be replaced. This is inserted in to an IC socket and can be carefully pried up out ofhte socket. Please note the orientation of the part so that the new one gets inserted correcty.

Dan

Re: CMOS battery-Alphaserver DS10

Deepak Raheja — Fri, 24 Sep 2010 16:07:19 GMT

Thanks, Dan/Chan

I found the real time clock chip,infact I have seen it earlier too but ignored.

Let me replace with a new one and I hope with yours valuable advice I will able to normalise my system.

Regards,
Deepak Raheja