topic Re: a problem on user login in Operating System - OpenVMS

a problem on user login

Davor_7 — Tue, 13 Sep 2005 03:39:42 GMT

i create a new account named test01(NODISUSER),and have set a default directory for him, but it cannot login(error: Logins are currently disabled; try again later). another account(wwww) is ok.
here are the parameters, pls help me to check the reason, thanks:

$ dir test01/full

Directory USERS:[VMS]

TEST01.DIR;1 File ID: (1562,39,0)
Size: 1/9 Owner: [VMS,TEST01]
Created: 13-SEP-2005 14:30:32.10
Revised: 13-SEP-2005 14:53:24.08 (1)
Expires:
Backup:
Effective:
Recording:
File organization: Sequential
Shelved state: Online
File attributes: Allocation: 9, Extend: 0, Global buffer count: 0, No default version limit, Contiguous, Directory file
Record format: Variable length, maximum 512 bytes, longest 512 bytes
Record attributes: No carriage control, Non-spanned
RMS attributes: None
Journaling enabled: None
File protection: System:RWE, Owner:RWE, Group:RE, World:E
Access Cntrl List: None

UAF> sh wwww/full

Username: WWWW Owner: Davor
Account: UIC: [30,31] ([VMS,WWWW])
CLI: DCL Tables: DCLTABLES
Default: USERS:[VMS.WWWW]
LGICMD: LOGIN
Flags: DisMail
Primary days: Mon Tue Wed Thu Fri
Secondary days: Sat Sun
No access restrictions
Expiration: (none) Pwdminimum: 8 Login Fails: 0
Pwdlifetime: 30 00:00 Pwdchange: 2-SEP-2005 15:43
Last Login: 13-SEP-2005 14:53 (interactive), 29-AUG-2005 20:09 (non-interactive)
Maxjobs: 0 Fillm: 300 Bytlm: 200000
Maxacctjobs: 0 Shrfillm: 0 Pbytlm: 0
Maxdetach: 0 BIOlm: 300 JTquota: 0
Prclm: 2 DIOlm: 300 WSdef: 4096
Prio: 4 ASTlm: 500 WSquo: 8092
Queprio: 0 TQElm: 300 WSextent: 8092
CPU: (none) Enqlm: 200 Pgflquo: 250000
Authorized Privileges:
DIAGNOSE NETMBX READALL SETPRV TMPMBX
Default Privileges:
DIAGNOSE NETMBX OPER READALL TMPMBX

UAF> sh test01/full

Username: TEST01 Owner: Davor
Account: 10698059 UIC: [30,101] ([VMS,TEST01])
CLI: DCL Tables: DCLTABLES
Default: USERS:[VMS.TEST01]
LGICMD: LOGIN
Flags: DisMail
Primary days: Mon Tue Wed Thu Fri
Secondary days: Sat Sun
No access restrictions
Expiration: (none) Pwdminimum: 8 Login Fails: 2
Pwdlifetime: 90 00:00 Pwdchange: 13-SEP-2005 14:27
Last Login: (none) (interactive), (none) (non-interactive)
Maxjobs: 0 Fillm: 300 Bytlm: 60000
Maxacctjobs: 0 Shrfillm: 0 Pbytlm: 0
Maxdetach: 0 BIOlm: 40 JTquota: 0
Prclm: 15 DIOlm: 500 WSdef: 1024
Prio: 4 ASTlm: 40 WSquo: 10240
Queprio: 0 TQElm: 40 WSextent: 20480
CPU: (none) Enqlm: 2000 Pgflquo: 160000
Authorized Privileges:
NETMBX TMPMBX
Default Privileges:
NETMBX TMPMBX

Re: a problem on user login

Bojan Nemec — Tue, 13 Sep 2005 03:43:12 GMT

Davor,

Check SET LOGINS/INTERACTIVE. User WWWW has OPER priviledge and hi can login if logins are disabled or the maximum is reached.

Bojan

Re: a problem on user login

Davor_7 — Tue, 13 Sep 2005 03:49:12 GMT

Hi Bojan

there's no problem on interaction login number. because user WWWW can login interactively with the same terminal dialog box.

Re: a problem on user login

Bojan Nemec — Tue, 13 Sep 2005 03:56:04 GMT

Davor,

Operators (that who have OPER privilege) can login if logins are disabled because is supposed they must manage the system (queues etc...). Normal users (without OPER privilege) can not login.
In yours case WWWW has OPER privilege and TEST01 has no OPER privilege.

Bojan

Re: a problem on user login

Ian Miller. — Tue, 13 Sep 2005 04:14:19 GMT

Do
$ MCR SYSGEN SHOW IJOBLIM
to check the current limit.

Re: a problem on user login

Davor_7 — Tue, 13 Sep 2005 04:16:22 GMT

WOW~ COOL!
it works :)

Re: a problem on user login

Davor_7 — Tue, 13 Sep 2005 04:17:23 GMT

after i add a OPER default privilege for this a/c

it works~

closed

thanks!

Re: a problem on user login

Davor_7 — Tue, 13 Sep 2005 04:18:33 GMT

Miller

i think that's not the problem about current limit number
thanks all the same

Re: a problem on user login

Bojan Nemec — Tue, 13 Sep 2005 04:20:37 GMT

Davor,

The right way is to modify the limit not to add privileges to users.

Bojan

Re: a problem on user login

Davor_7 — Tue, 13 Sep 2005 04:23:08 GMT

oh?
how to modify it ?

Re: a problem on user login

Bojan Nemec — Tue, 13 Sep 2005 04:38:48 GMT

Davor,

First see SET LOGINS/INTERACTIVE this will display a line like this:
%SET-I-INTSET, login interactive limit = , current interactive value =

is the limit and
is the current value

If >= you can not login as normal user (OPER privilege needed).
You modify the value with SET LOGINS/INTERACTIVE=

where is the new interactive limit. This command modifies the IJOBLIM parameter mentioned by Ian.

You can modify the limit in yours SYS$MANAGER:SYSTARTUP_VMS.COM with adding a line:

$ STARTUP$INTERACTIVE_LOGINS ==

where is the number of interactive logins.

Bojan

Re: a problem on user login

Davor_7 — Tue, 13 Sep 2005 04:41:53 GMT

oh! great!

thank you very much !!!!!

:p

Re: a problem on user login

Jan van den Ende — Sat, 17 Sep 2005 06:04:39 GMT

Davor,

from your Forum Profile:

I have assigned points to 24 of 70 responses to my questions.

Maybe you can find some time to do some assigning?

Mind, I do NOT say you necessarily need to give lots of points. It is fully up to _YOU_ to decide how many. If you consider an answer is not deserving any points, you can also assign 0 ( = zero ) points, and then that answer will no longer be counted as unassigned.
Consider, that every poster took at least the trouble of posting for you!

To easily find your streams with unassigned points, click your own name somewhere.
This will bring up your profile.
Near the bottom of that page, under the caption â My Question(s)â you will find â questions or topics with unassigned points â Clicking that will give all, and only, your questions that still have unassigned postings.

Thanks on behalf of your Forum colleagues.

PS. â nothing personal in this. I try to post it to everyone with this kind of assignment ratio in this forum. If you have received a posting like this before â please do not take offence â none is intended!

PS2.
You can also re-open a thread, assign points, and close it again.

Proost.

Have one on me.

Jan

Re: a problem on user login

Davor_7 — Sat, 17 Sep 2005 10:41:35 GMT

thanks Jan

i can spend sometime to do it next week :)