topic 6402/6404 RAID on OpenVMS Integrity ? in Operating System - OpenVMS

6402/6404 RAID on OpenVMS Integrity ?

Lars Funck Jensen_1 — Fri, 10 Mar 2006 07:45:15 GMT

The 640x RAID controller has just been released on OpenVMS (Alpha) and Integrity.

I am mostly interested in 2620/4640 Integrity servers.

Assuming - just for this example - that I have 2 300 GB disks using RAID 1.

Can I partition this physical diskgroup into one or more BOOTABLE partitions
= OpenVMS system disk(s) of say 10-20 GB each ????

In addition to the bootable partitions I want to configure the remaining diskspace into one or more normal OpenVMS disks ???

Can this be done from console-mode ?, from a booted OpenVMS DVD ? or will
I need to run OpenVMS from a SCSI disk on the internal/external
SCSI controller?

Re: 6402/6404 RAID on OpenVMS Integrity ?

Uwe Zessin — Fri, 10 Mar 2006 08:37:16 GMT

The 640x is a SmartArray controller and those allow the creation of multiple logical disks within a disk drive array. So, technically, yes, you should be able to create multiple logical disks with a RAID-level of 1 on a 2-disk drive array.

The RAID-level is a characteristic of an individual logical disk / a disk drive array is not 'partitioned' into multiple logicald Disks. If you create a disk drive array with more disks you can create a logical disk with RAID-1 and another logical disk with RAID-5.

The question remains whether you get an appropriate management utility (ACU) that allows to do that.

Re: 6402/6404 RAID on OpenVMS Integrity ?

Lars Funck Jensen_1 — Fri, 10 Mar 2006 09:10:55 GMT

>> The question remains whether you get an
>> appropriate management utility (ACU) that
>> allows to do that
on OpenVMS

That is where I am, but on OpenVMS and Integrity I have no info.

I may move the 640x to a Win2K3 system for configuration, but what about service etc.

Re: 6402/6404 RAID on OpenVMS Integrity ?

Ian Miller. — Fri, 10 Mar 2006 09:16:45 GMT

I belive the config utility is due out very soon.

Re: 6402/6404 RAID on OpenVMS Integrity ?

Volker Halle — Sat, 18 Mar 2006 11:47:57 GMT

Lars,

the config utility is there now:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1011669

Volker.

Re: 6402/6404 RAID on OpenVMS Integrity ?

Volker Halle — Mon, 20 Mar 2006 11:14:33 GMT

Lars,

the ITRC 'police' has apparently removed Sue's entry for the 6402/6404 SmartArray announcement.

Consider to use google to search for 'openvms acu-xe' - I hope the ACU-XE page for OpenVMS will show up again some time soon... The URL should be or once was:

h71000.www7.hp.com/openvms/products/acuxe/

Volker.

Re: 6402/6404 RAID on OpenVMS Integrity ?

Ian Miller. — Mon, 20 Mar 2006 11:34:30 GMT

From
http://www.openvms.org/stories.php?story=06/03/17/4095961

I found
http://h71000.www7.hp.com/openvms/products/acuxe/

the specific vms info is in
http://h71000.www7.hp.com/openvms/products/acuxe/installation.html
http://h71000.www7.hp.com/openvms/products/acuxe/release_notes.html

Re: 6402/6404 RAID on OpenVMS Integrity ?

Lars Funck Jensen_1 — Thu, 23 Mar 2006 08:21:33 GMT

Thanks. I did see the info last week, but was out of office until today.

I am closing here

Re: 6402/6404 RAID on OpenVMS Integrity ?

Lars Funck Jensen_1 — Thu, 23 Mar 2006 08:22:03 GMT

Closed