topic Re: Not able to mount devices in BIND set. in Operating System - OpenVMS

Not able to mount devices in BIND set.

Debasis Bhar — Tue, 10 Jun 2008 06:19:42 GMT

NODE01$ MOUNT/SYSTEM/NOCACHE/noassist/bind=TEMP $1$DGA3:,$1$DGA4:,
$1$DGA5:,$1$DGA6:,$1$DGA7: TEMP,TEMP1,TEMP2,TEMP3,TEMP4 TEMP
%MOUNT-F-DEADLOCK, deadlock detected
NODE01$

Any idea how i can check what is wrong. 4 Disks are of 300GB and one disk is 120Gb.

Re: Not able to mount devices in BIND set.

Kris Clippeleyr — Tue, 10 Jun 2008 07:02:54 GMT

Hi,
Being not that familiar with bound volume sets, I think that your MOUNT command violates the rules of creating a volume set.
In the HELP MOUNT /BIND is stated that

...if the first 12 characters of volume-set name are the same as the first 12 characters of any volume lable, a lock manager deadlock occurs...

So, in your example the volume-set-name is "TEMP" as is the 1st label you specify.
Please change the volume-set-name and try again.
Regards,
Kris (aka Qkcl)

Re: Not able to mount devices in BIND set.

Debasis Bhar — Tue, 10 Jun 2008 08:03:42 GMT

Thanks Kris. Now i am able to mount it after changing the volume label.

Best Regards
Debasis

Re: Not able to mount devices in BIND set.

Debasis Bhar — Tue, 10 Jun 2008 08:04:21 GMT

i have got my answer.