What privilege does a user need to run a EXE on a remote node?

arun sanghvi — Fri, 17 May 2013 14:23:39 GMT

Hello

As shown below user is unable to run EXE on node ANTVX4 from VAX6.

$ run antvx4"amehta pwd"::SYS$SYSDEVICE:[PERM.SAP4G07V]SAP4G7E3
%DCL-W-ACTIMAGE, error activating image ANTVX4"amehta sesmic"::SYS$SYSDEVICE:[PE
RM.SAP4G07V]SAP4G7E3
-CLI-E-IMGNAME, image file ANTVX4"amehta password"::SYS$SYSDEVICE:[PERM.SAP4G07V
]SAP4G7E3.EXE;
-RMS-E-ACC, ACP file access failed
-SYSTEM-F-LINKEXIT, network partner exited

EXE does exist and has w:RE

ANTVX4::>dir
Directory SYS$SYSDEVICE:[000000.PERM.SAP4G07V]
SAP4G7E3.EXE;1 2315/2316 24-JUN-1998 14:49:28.42 (RWED,RWED,E,RE)

EXE runs OK if I use "sysmgr" account.

What privilege does user require for user to run EXE on a remote node?

Thanks.

Re: What privilege does a user need to run a EXE on a remote node?

Hein van den Heuvel — Fri, 17 May 2013 16:08:44 GMT

>> user is unable to run EXE on node ANTVX4 from VAX6.

Hold it right there....

$ run antvx4::SAP4G7E3

That's just a remote file spec. It is NOT a command to run something ON vx4, but FROM vx4.

It that what is intended?

One READ priv is needed for that (because it is not execution)

http://h71000.www7.hp.com/doc/73final/9996/9996pro_046.html

Hein.

topic What privilege does a user need to run a EXE on a remote node? in Operating System - OpenVMS

What privilege does a user need to run a EXE on a remote node?

Re: What privilege does a user need to run a EXE on a remote node?