topic Re: SWXCR (KZESC) error "too many entries in the change list" in Operating System - OpenVMS

SWXCR (KZESC) error "too many entries in the change list"

Larry Dodd — Fri, 06 Aug 2004 22:16:12 GMT

I changed the config of a SWXCR (KZESC)in a Alphaserver 1000A and now I get a "WARNING: Too many entries in the change list; reset the systen to flush it" at powerup. I removed 3 logical drives and added one. How do I clear this error.

Re: SWXCR (KZESC) error "too many entries in the change list"

Wim Van den Wyngaert — Mon, 16 Sep 2024 09:22:59 GMT

Temporary tables in the controller are full; the controller needs to be reset.

POwer cycle the 1000 ?

Wim

Re: SWXCR (KZESC) error "too many entries in the change list"

Larry Dodd — Thu, 12 Aug 2004 15:58:46 GMT

I have power cycled the 1000 and the error remains.

Re: SWXCR (KZESC) error "too many entries in the change list"

Antoniov. — Fri, 13 Aug 2004 02:05:24 GMT

Might be some system parameters?
AUTGEN may help you, I guess.

Antonio Vigliotti

Re: SWXCR (KZESC) error "too many entries in the change list"

Lawrence Czlapinski — Mon, 16 Aug 2004 15:37:56 GMT

Antoniov, a Raid Configuration Utility (RCU) is selected from the ARC console to change RAID configurations before VMS is booted. There are no AUTOGEN system parameters involved. Configuring the RAID Array: "You can create a maximum of 8 logical RAID drives per controller."
Unfortunately Larry's error message is not helpful.