topic Re: HP Perl CPAN modules installation problem in Operating System - OpenVMS

HP Perl CPAN modules installation problem

Alex Chupahin — Mon, 28 Nov 2011 12:51:12 GMT

Hello dear all openVMS guru

I try to install Digest::SHA 5.63 module on my OpenVMS 7.3-2 system

with perl CPQ AXPVMS PERL V5.8-6

(Latest available)

I unpack source;

$perl Makefile.PL

and just get:

Checking if your kit is complete...
Warning: the following files are missing in your kit:
   changes
   examples/dups
   lib/digest/sha.pm
   makefile.pl
   MANIFEST
   meta.yml
   readme
   sha.xs
   shasum
   src/hmac.c
   src/hmac.h
   src/hmacxtra.c
   src/sha.c
   src/sha.h
   src/sha64bit.c
   src/sha64bit.h
   src/shaxtra.c
   t/allfcns.t
   t/base64.t
   t/bitbuf.t

all files in the distributive.

What I'm doing wrong?

Re: HP Perl CPAN modules installation problem

Craig A Berry — Mon, 28 Nov 2011 16:19:03 GMT

Various versions of various manifest checkers in the Perl world are case sensitive, which tends not to give expected results under circumstances where filename case is not (by default) preserved. Most likely you can ignore these warnings and build anyway.

Or get any version of Perl from 5.10 onward (5.14.2 is current) because DIgest::SHA has long since been included in the Perl core.

Re: HP Perl CPAN modules installation problem

Alex Chupahin — Tue, 29 Nov 2011 07:03:02 GMT

Ok, thank you.
Then I should do "MMK"

$mmk...
Copy/NoConfirm shasum [.blib.script]shasum

and nothing more.
What can I do?

Re: HP Perl CPAN modules installation problem

Craig A Berry — Tue, 29 Nov 2011 20:24:07 GMT

The full sequence is:

$ perl Makefile.PL

$ mmk

$ mmk test

$ mmk install

The penultimate command will run any tests distributed with the module and tell you whether everything looks ok. The last command will likely require privileges and will add the module to your Perl installation.

Re: HP Perl CPAN modules installation problem

Alex Chupahin — Wed, 30 Nov 2011 05:18:27 GMT

ok, full sequence:

$perl Makefile.PL

Checking if your kit is complete...
Warning: the following files are missing in your kit:
...

...

$mmk

Copy/NoConfirm shasum [.blib.script]shasum

and nothing more. It looks like incomplete procedure, because

in unix there are many strings shows me a compilation the shared library SHA.so

$mmk test

MCR dka500:[sys0.syscommon.perl5_8_6]perl.exe "-MExtUtils::Command::MM" "-e" "te
st_harness(0, '[.blib.lib]', '[.blib.arch]')" t/*.t
t/allfcns......
Can't locate Digest/SHA.pm in @INC (@INC contains: /SYS$SYSROOT/SYSMGR/ALEX/GNU/
CLAMAV/DIGEST-SHA-5_63/blib/lib

Ok, I can copy SHA.PM file into [.BLIB.LIB.DIGEST] by hands

once more:

$mmk test

MCR dka500:[sys0.syscommon.perl5_8_6]perl.exe "-MExtUtils::Command::MM" "-e" "te
st_harness(0, '[.blib.lib]', '[.blib.arch]')" t/*.t
t/allfcns......
Can't locate loadable object for module Digest::SHA in @INC (@INC contains: /SYS
$SYSROOT/SYSMGR/ALEX/GNU/CLAMAV/DIGEST-SHA-5_63/blib/lib /SYS$SYSROOT/SYSMGR/ALE
X/GNU/CLAMAV/DIGEST-SHA-5_63/blib/arch

looks like missing share library. (in unix this step is present).

And looks like broken installation procedure.

What I'm doing wrong?

I'm using VMS perl rarely from time to time, but many years since 5.04(or like it) and never seen any working cpan modules in VMS perl. Previously, I found workarounds (do the work in unix perl and copy results to VMS to continue work), but now I SHOULD do some work in VMS and need some CPAN modules installed.

Help me please.

Re: HP Perl CPAN modules installation problem

Craig A Berry — Thu, 01 Dec 2011 04:53:24 GMT

Something's broken in your set-up, but I've seen many working Perl modules on VMS, including Digest::SHA, so there's hope. But you're using an old and unsupported version of Perl with an unknown version of MMK and trying to build the latest Digest::SHA, which has not been tested with your toolchain. The only free advice I can offer is to upgrade to a current and supported version of Perl. And check that you have the latest MMK. Since the last three major Perl releases already include Digest::SHA, you won't need to build it, and you'll have more up-to-date build facilities if you do need to build any other extensions.

If you absolutely must use the HP-supplied Perl 5.8.6, you could try to get support from HP on it. They will probably tell you to look for community support. You can tell them back that the community has officially de-supported versions prior to 5.12, so if HP wants its customers to use the obsolete version HP distributes, then HP will need to support it.

Re: HP Perl CPAN modules installation problem

Hoff — Thu, 01 Dec 2011 14:51:52 GMT

>Previously, I found workarounds (do the work in unix perl and copy results to VMS to continue work), but now I SHOULD do some work in VMS and need some CPAN modules installed.

This particular sentence makes "Nuke and Pave" look like the best remediation for this installation environment.

To continue what Mr Berry wrote, you're seeking to continue to patch ancient software, and particularly with unknown workarounds and changes and with bits of a Unix Perl build lurking. Download the current (community) bits, and a recent MMK. Delete the Perl directories (or RENAME them out of the default locations), and install and configure a recent and fresh Perl distro and add the necessary modules. Start over.

Your other option is to start debugging your environment, and that's likely going to take longer.

Having a relatively pristine Perl installation environment also means that the kits and related pieces that you are probably porting are more likely to be portable to other Perl installations and other OpenVMS platforms, if that's your goal here. Porting packages from a heavily customized environment tends to be more difficult.

Re: HP Perl CPAN modules installation problem

Alex Chupahin — Mon, 05 Dec 2011 11:34:45 GMT

Ok, I'm trying to compile latest 5.14.2 perl:

@configure

@mmk

Compiling process was good until this error:

Making all in ext/DynaLoader
MMK "all" /DESCRIPTION=descrip.mms /MACRO=("PERL_CORE=1")
MCR dka500:[sys0.syscommon.perl5_8_6]perl.exe "-MExtUtils::Command" -e rm_rf [--
]
Use of uninitialized value in chmod at /perl_root/lib/File/Path.pm line 199.
Can't make directory [--] read+writeable: no such file or directory at /perl_roo
t/lib/ExtUtils/Command.pm line 95
Can't read [--]: directory not found at /perl_root/lib/ExtUtils/Command.pm line
95
Can't remove directory ../../: directory not found at /perl_root/lib/ExtUtils/Co
mmand.pm line 95
Use of uninitialized value in chmod at /perl_root/lib/File/Path.pm line 242.
and can't restore permissions to 0755
at /perl_root/lib/ExtUtils/Command.pm line 95
Copy/NoConfirm [--]
%DCL-W-INSFPRM, missing command parameters - supply all required parameters
%MMK-F-ERRUPD, error status %X00038048 occurred when updating target [--]
%MMK-F-ERRUPD, error status %X00038048 occurred when updating target [--]
Unsuccessful make(ext/DynaLoader): code=1024 at make_ext.pl line 463.
%NONAME-F-NOMSG, Message number 0C14803C
%MMK-F-ERRUPD, error status %X0C14803C occurred when updating target DYNALOADER.
OBJ

Please note, I tried to specify PREFIX to change installation directory

@Configure "-d" "-Dprefix=dka100:[perl5.]"

@mmk

with same error.

What I'm doing wrong?

What stable perl version I should use?

Re: HP Perl CPAN modules installation problem

Hoff — Mon, 05 Dec 2011 13:11:43 GMT

If you installed the HP kit with PCSI, then PRODUCT REMOVE the old Perl bits. Clean up any of the remaining Perl directory detritus from the failed build, temporarily remove or comment out the Perl commands from the startup and login, reboot, log in, issue the command DELETE /SYMBOL /GLOBAL /ALL to remove all local symbol-based customizations, then try the build again.

Re: HP Perl CPAN modules installation problem

Craig A Berry — Mon, 05 Dec 2011 23:14:18 GMT

5.14.2 is the current stable release, so you're good there.

MMK is not a command procedure so you probably don't want the "@" in front of it.

It does look as though you are somehow building on top of the existing installation. You don't need to remove that installation, but you do need to build somewhere else.

The prefix only has to do with where Perl will be installed, not with the build as such.

Re: HP Perl CPAN modules installation problem

Alex Chupahin — Tue, 13 Dec 2011 11:40:37 GMT

Unfortunately still I'm not good.
another system 8.4, clean from any perl

trying to compile PERL:

$MMK

.....

Making all in ext/DynaLoader
MMK "all" /DESCRIPTION=descrip.mms /MACRO=("PERL_CORE=1")
MCR SYS$SYSROOT:[SYSMGR.ALEX.PERL.PERL-5_14_2]miniperl.exe "-I[--.lib]" "-I[--.
lib]" "-MExtUtils::Command" -e "rm_rf" "--" [--]
cannot opendir for [--]: directory not found at /SYS$SYSROOT/SYSMGR/ALEX/PERL/P
ERL-5_14_2/dist/ExtUtils-Command/lib/ExtUtils/Command.pm line 134
cannot remove directory for [--]: file not found at /SYS$SYSROOT/SYSMGR/ALEX/PE
RL/PERL-5_14_2/dist/ExtUtils-Command/lib/ExtUtils/Command.pm line 134
MCR SYS$SYSROOT:[SYSMGR.ALEX.PERL.PERL-5_14_2]miniperl.exe "-I[--.lib]" "-I[--.
lib]" "-MExtUtils::Command" -e "cp" "--" [--]
%MMK-I-ACTNOUPD, action did not update target DYNALOADER.OBJ
Link /NoTrace/NoMap/Share=PERLSHR.EXE DynaLoader.obj, []perlshr_bld.opt/Option,
perlshr_attr.opt/Option
%LINK-F-OPENIN, error opening SYS$COMMON:[SYSMGR.ALEX.PERL.PERL-5_14_2]DYNALOAD
ER.OBJ; as input
-RMS-E-DNF, directory not found
-SYSTEM-W-NOSUCHFILE, no such file

The same error
what is wrong?

Is there any known working perl version ?

Re: HP Perl CPAN modules installation problem

Hoff — Tue, 13 Dec 2011 13:40:17 GMT

Follow these instructions exactly, and do not diverge from what is listed save for the device and directory name you will use. Instructions: <http://search.cpan.org/dist/perl/README.vms>

For this case, unpack the Perl distribution into the SYS$SYSDEVICE:[PERL-5_14_2...] directory.

Do NOT use SYS$SYSROOT:[SYSMGR.ALEX.PERL.PERL-5_14_2], nor any other SYS$SYSROOT-based directory.

As listed in the directions, use the specified MMK or MMS command generated by the CONFIGURE tool.

In general, you should avoid using a SYS$ROOT-based directory (such as SYS$MANAGER), as many build procedures and many tools are not written to expect that particular directory structure usage. Weird errors can result.

Re: HP Perl CPAN modules installation problem

Alex Chupahin — Tue, 13 Dec 2011 14:39:23 GMT

Perl 5.12.4

The same error

Re: HP Perl CPAN modules installation problem

Alex Chupahin — Wed, 14 Dec 2011 12:23:20 GMT

I've Tryed procedure exactly as recommended by Hoff (thank you very much for you and all)

first: still incomplete build procedure:

DynaLoader.C not found

I've maden it by myself via hands regards to other success modules in OpenVMS

Compilation is finished successfully.

Now I'm testing compiled perl

Second: MMS is not work, only MMK required.

Re: HP Perl CPAN modules installation problem

Alex Chupahin — Fri, 16 Dec 2011 11:32:23 GMT

ALL THINGS STILL BAD

Is there anywhere true working perl installation???

What I'm doing wrong now?

I make all things EXACTLY follow by instruction in README.VMS

Then wish to use CPAN.

$CPAN

after all questions I just get error

Would you like me to automatically choose some CPAN mirror
sites for you? (This means connecting to the Internet) [yes]
Looking for CPAN mirrors near you (please be patient)
The flock() function is unimplemented at /perl_root/lib/CPAN/Mirrors.pm line 23, <STDIN> line 69.

Re: HP Perl CPAN modules installation problem

Alex Chupahin — Fri, 16 Dec 2011 11:47:49 GMT

dont work with same error
$perl "-MCPAN" "-e" "shell"

also