topic Re: Decnet Help with copy error please in Operating System - OpenVMS

Decnet Help with copy error please

gunners — Tue, 28 Jun 2011 08:28:44 GMT

Hi There,

I have two OPENVMS 8.3-1H1 systems. Decnet is running between them both and I can set host and login fine using username and password from one to the other.

However when I try and copy files across it gives me 'ACP FILE CREATE FAILED' , Login information invalid at remote node'

Even though I can set host and login using the same user and password.

Any ideas ?

Thanks a mill

Re: Decnet Help with copy error please

Volker Halle — Tue, 28 Jun 2011 09:27:29 GMT

Hi,

which syntax do you use to copy the file ? Please give an example including the error message. Make sure to replace the password with '...' in the example shown.

The correct syntax would be: $ copy filename node"user password"::

Volker.

Re: Decnet Help with copy error please

gunners — Tue, 28 Jun 2011 09:43:35 GMT

Hi Volker , thanks for your reply - ok here is the detail

copy/lo SYNCHRONISE_CONTINGENCY_IBID90_KLONE.COM IBID91"FITZGERALDDM password"::*.*

%COPY-E-OPENOUT, error opening IBID91"FITZGERALDDM password"::[]SYNCHRONISE_CONT

INGENCY_IBID90_KLONE.COM;1 as output

-RMS-E-CRE, ACP file create failed

-SYSTEM-F-INVLOGIN, login information invalid at remote node

%COPY-W-NOTCOPIED, DSA1200:[FITZGERALDDM]SYNCHRONISE_CONTINGENCY_IBID90_KLONE.CO

M;1 not copie

Re: Decnet Help with copy error please

Kris Clippeleyr — Tue, 28 Jun 2011 09:44:15 GMT

Are proxies enabled?
DECnet Phase IV or V?
Could you show us the actual command?
Kris (aka Qkcl)

Re: Decnet Help with copy error please

gunners — Tue, 28 Jun 2011 09:58:20 GMT

Hi Kris , hmm re the proxies - not sure on that , how would I check ?

(Decnet was configured for us by someone else)

Re: Decnet Help with copy error please

Volker Halle — Tue, 28 Jun 2011 11:13:01 GMT

Hi,

the syntax looks o.k. - did it ever work ?

Maybe the account FITZGERALDDM on node IBID91 is not authorized for NETWORK logins ? Contact the system manager of the remote node and have him check that account. Enable network logins with UAF> MOD FITZGERALDDM/NETWORK

Volker.

Re: Decnet Help with copy error please

gunners — Tue, 28 Jun 2011 12:01:12 GMT

Hi Volker - Brilliant , that UAF modification has done the trick. Thanks so much for the help. Points on the way :)