topic Configure Raid in Operating System - OpenVMS

Configure Raid

Brian Fox_1 — Wed, 26 Jan 2005 17:49:14 GMT

i need to know how to configure internal drives for RAID on an alpha ES40

Re: Configure Raid

Karl Rohwedder — Thu, 27 Jan 2005 00:59:36 GMT

That depends:
- do you have am internal RAID controller, read its assocoated manual

- if you use software RAID, socalled shadowing gives you RAID-1, you need a license, e.g. VOLSHAD, the manual is here http://h71000.www7.hp.com/doc/732FINAL/aa-pvxmj-te/aa-pvxmj-te.HTML

- another product Compaq RAID SW gives you RAID-0 and RAID-5 and can be combined with VOLSHAD to create RAID-0+1 arrays

Re: Configure Raid

Lawrence Czlapinski — Thu, 27 Jan 2005 16:27:17 GMT

Brian, if you are shadowing the drives besides the shadowing license, you will also need to prepare the logical RAID drives as either system or data drive for shadowing. For our RAID array, the procedures are in the StorageWorks RAID Array 200 Online Management Utility for OpenVMS AXP Users Guide, AA-Q6WVB-TE. You may have a different Users Guide.
Lawrence

Re: Configure Raid

Ian Miller. — Fri, 28 Jan 2005 06:06:36 GMT

Brian,
Welcome to the VMS Forum. See
http://forums1.itrc.hp.com/service/forums/helptips.do?#33

Some addtional information on your hardware and software environment would assist people in answering your questions.

What version of VMS, what raid controller if any?

Re: Configure Raid

Anton van Ruitenbeek — Fri, 28 Jan 2005 07:01:38 GMT

Brian,

If you get the change: DON'T USE ANY RAID but use Host Based Shadowing !
If you are using HBVS, then you may try to use the disks for RAID.
This because using HBVS you got much more flexibility and control on VMS. If a RAID failes, you only can see if youre playing with the raid configurator or some external monitor tool. If a member of HBVS is missing you directy see on VMS. If a failure is on the drive, you can replace the defect one and mount this one on VMS whitout worying any RAIDs sets.

We have only JBODs. This for several, several years and the advantage is what I mentioned. On the windows and Unix site they are using RAID. If a member failed they have a lot of problems of placing the right drive in the right slot etc.

AvR