https://community.hpe.com/t5/operating-system-openvms/openvms-and-hdlc-arcnet/m-p/3488780#M48647 I am interested in developing software under AlphaServer/OpenVMS to communicate with an automation controller on an HDLC/SDLC network. The network cabling is RS-485. The protocol is ARCNET based. Can someone confirm that I can use the following products to implement this (and that they are current):<BR /><BR />- Compaq X.25 driver V1.6<BR />- Compaq PBXDD-Ax PCI adaptor<BR /><BR />I do not want to use any of the DECnet OSI stuff, just direct $qios to the SDLC network. <BR /><BR />Also, is there any sort of ARCNET products available for OpenVMS either by HP/Compaq or another provider?<BR /><BR />Thank you for your assistance.<BR />- Jeff Payne Fri, 18 Feb 2005 08:07:04 GMT Jeff Payne_1 2005-02-18T08:07:04Z https://community.hpe.com/t5/operating-system-openvms/openvms-and-hdlc-arcnet/m-p/3488780#M48647 I am interested in developing software under AlphaServer/OpenVMS to communicate with an automation controller on an HDLC/SDLC network. The network cabling is RS-485. The protocol is ARCNET based. Can someone confirm that I can use the following products to implement this (and that they are current):<BR /><BR />- Compaq X.25 driver V1.6<BR />- Compaq PBXDD-Ax PCI adaptor<BR /><BR />I do not want to use any of the DECnet OSI stuff, just direct $qios to the SDLC network. <BR /><BR />Also, is there any sort of ARCNET products available for OpenVMS either by HP/Compaq or another provider?<BR /><BR />Thank you for your assistance.<BR />- Jeff Payne Fri, 18 Feb 2005 08:07:04 GMT https://community.hpe.com/t5/operating-system-openvms/openvms-and-hdlc-arcnet/m-p/3488780#M48647 Jeff Payne_1 2005-02-18T08:07:04Z