https://community.hpe.com/t5/operating-system-openvms/decnis-500-hang/m-p/3494858#M48728 I have a DECNIS 500 that is used exclusively for X.25 communications. I recently started experiencing trouble with this DECNIS that is characterized by my inability to SHOW and attribute using NCL (the connection ultimately times out). Moreover, I am not able to successfully perform a CTF trace of Level 2 or Level 3. <BR /><BR />So far, Field Service has replaced every component except for the memory module, which happens to be the most likely cause of this problem.<BR /><BR />Has anyone else experienced these same symptoms? If so, could you describe the resolution, if any? Tue, 01 Mar 2005 01:41:48 GMT Mario Abruzzi 2005-03-01T01:41:48Z https://community.hpe.com/t5/operating-system-openvms/decnis-500-hang/m-p/3494858#M48728 I have a DECNIS 500 that is used exclusively for X.25 communications. I recently started experiencing trouble with this DECNIS that is characterized by my inability to SHOW and attribute using NCL (the connection ultimately times out). Moreover, I am not able to successfully perform a CTF trace of Level 2 or Level 3. <BR /><BR />So far, Field Service has replaced every component except for the memory module, which happens to be the most likely cause of this problem.<BR /><BR />Has anyone else experienced these same symptoms? If so, could you describe the resolution, if any? Tue, 01 Mar 2005 01:41:48 GMT https://community.hpe.com/t5/operating-system-openvms/decnis-500-hang/m-p/3494858#M48728 Mario Abruzzi 2005-03-01T01:41:48Z https://community.hpe.com/t5/operating-system-openvms/decnis-500-hang/m-p/3494859#M48729 Its been a while since I saw one but it does sounds like lack of memory and thefore replace the memory. Tue, 01 Mar 2005 03:43:43 GMT https://community.hpe.com/t5/operating-system-openvms/decnis-500-hang/m-p/3494859#M48729 Ian Miller. 2005-03-01T03:43:43Z