https://community.hpe.com/t5/operating-system-openvms/creating-tna-ports/m-p/3559434#M49313 do you look at the socket (UCX SHO DEV BGxxx)<BR />when there is a problem?<BR />The status information may help. Tue, 07 Jun 2005 12:28:25 GMT Ian Miller. 2005-06-07T12:28:25Z https://community.hpe.com/t5/operating-system-openvms/creating-tna-ports/m-p/3559433#M49312 Hello everyone<BR /><BR />I'm trying to capture information coming from a weighbridge, via a DECserver 90 port. I've<BR />created a TNA port using the command<BR /><BR />telnet/create/notimeout DS1 2008 100<BR />This creates TNA100 and then I set the permissions for this port.<BR /><BR />I have also set up telnet listener on the decserver port.<BR /><BR />I can then see the data on the port, but every so often it stops working, and I have to delete the TNA port and then create it again and it starts working again for a while.<BR /><BR />Any suggestions as to how I can get it to be more stable ??<BR /><BR />Thanks,<BR />Gerry Tue, 07 Jun 2005 09:24:55 GMT https://community.hpe.com/t5/operating-system-openvms/creating-tna-ports/m-p/3559433#M49312 Gerry Downey 2005-06-07T09:24:55Z https://community.hpe.com/t5/operating-system-openvms/creating-tna-ports/m-p/3559434#M49313 do you look at the socket (UCX SHO DEV BGxxx)<BR />when there is a problem?<BR />The status information may help. Tue, 07 Jun 2005 12:28:25 GMT https://community.hpe.com/t5/operating-system-openvms/creating-tna-ports/m-p/3559434#M49313 Ian Miller. 2005-06-07T12:28:25Z