topic Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4 in Operating System - OpenVMS

Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Ayya — Wed, 07 Sep 2005 09:37:18 GMT

Legacy VAX running UCX 3.1
Need to upgrade UCX to 4.2 or higher.
Is it supported.

Sini

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Wim Van den Wyngaert — Wed, 07 Sep 2005 10:03:56 GMT

In the release notes of 4.2 on my alpha it says VAX 6.2. So no.

3.2 is however supported on 5.5.

Wim

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Ayya — Wed, 07 Sep 2005 10:08:14 GMT

Thanks for the update.
Where can I get the Update from 3.1 to 3.2
The reason for the upgrade.
I am not able to set the route.

for example : VAX (192.168.253.10) is not reachable from say (192.168.252.10)
The usual "set route 192.168.252./gateway=192.168.253.1" does not seem to work.
Any thoughts?

sini

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Rob Kersey — Wed, 07 Sep 2005 10:12:05 GMT

I believe version 4.0 of UCX is the highest supported release for 5.5.2-H4.

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Jefferson Humber — Wed, 07 Sep 2005 10:15:52 GMT

Yes, UCX v.4.0 (with ECO 5) is the highest supported version on VAX v.5.5.2-H4.

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Ayya — Wed, 07 Sep 2005 10:19:43 GMT

Thanks.
Now I have to look for 4.0 and ECO 5 kit.

Sini

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Ian Miller. — Wed, 07 Sep 2005 10:26:40 GMT

eco kit is here
ftp://ftp.itrc.hp.com/archived_patches/openvms_patches/vax/5.X/v5.5-2/ucx/4.0/

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Ayya — Wed, 07 Sep 2005 10:42:39 GMT

Thanks all for the quick answer.

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Ian Miller. — Wed, 07 Sep 2005 10:50:18 GMT

See
http://forums1.itrc.hp.com/service/forums/helptips.do?#33

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Ayya — Wed, 07 Sep 2005 11:00:03 GMT

Upgrade to 4.0 with ECO 5

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Veli Körkkö — Wed, 07 Sep 2005 15:17:39 GMT

Well, I think one can have UCX V4.2 on top of VMS V5.5... but one needs the latest CRT kit aka AACRT060 before UCX V4.2 can be tried. It would not be supported though but then again, are VMS V5.5-2H4 and UCX V4.2 supported anyway?

_veli

Re: Will UCX 4.2 or higher work on VAX VMS 5.5-2H4

Jan van den Ende — Sat, 24 Sep 2005 07:28:02 GMT

Sini,

from your Forum Profile:

I have assigned points to 5 of 14 responses to my questions.

Maybe you can find some time to do some assigning?

Mind, I do NOT say you necessarily need to give lots of points. It is fully up to _YOU_ to decide how many. If you consider an answer is not deserving any points, you can also assign 0 ( = zero ) points, and then that answer will no longer be counted as unassigned.
Consider, that every poster took at least the trouble of posting for you!

To easily find your streams with unassigned points, click your own name somewhere.
This will bring up your profile.
Near the bottom of that page, under the caption â My Question(s)â you will find â questions or topics with unassigned points â Clicking that will give all, and only, your questions that still have unassigned postings.

Thanks on behalf of your Forum colleagues.

PS. â nothing personal in this. I try to post it to everyone with this kind of assignment ratio in this forum. If you have received a posting like this before â please do not take offence â none is intended!

Proost.

Have one on me.

jpe