https://community.hpe.com/t5/operating-system-openvms/lan-failover/m-p/5048539#M54676 I find documentation for failsafe IP. Where do I find documentation concerning LAN failover as referenced elsewhere on these forums?<BR /><BR />Does it work fine with Decnet Phase IV? Tue, 22 May 2007 16:05:30 GMT Peter Zeiszler 2007-05-22T16:05:30Z https://community.hpe.com/t5/operating-system-openvms/lan-failover/m-p/5048539#M54676 I find documentation for failsafe IP. Where do I find documentation concerning LAN failover as referenced elsewhere on these forums?<BR /><BR />Does it work fine with Decnet Phase IV? Tue, 22 May 2007 16:05:30 GMT https://community.hpe.com/t5/operating-system-openvms/lan-failover/m-p/5048539#M54676 Peter Zeiszler 2007-05-22T16:05:30Z https://community.hpe.com/t5/operating-system-openvms/lan-failover/m-p/5048540#M54677 See chapter 10, System Manager's Manual Vol 2 <A href="http://h71000.www7.hp.com/doc/82FINAL/aa-pv5nj-tk/aa-pv5nj-tk.HTMl." target="_blank">http://h71000.www7.hp.com/doc/82FINAL/aa-pv5nj-tk/aa-pv5nj-tk.HTMl.</A> <BR /><BR />LAN failover works very well with DECnet phase IV, Availability Manger, TCPIP, LAT, MOP, . . . <BR /><BR />Make sure to pay attention to supported NICs. Support for DE-500s was added in an ECO for 7.3-2. <BR /><BR />Andy Tue, 22 May 2007 16:13:13 GMT https://community.hpe.com/t5/operating-system-openvms/lan-failover/m-p/5048540#M54677 Andy Bustamante 2007-05-22T16:13:13Z https://community.hpe.com/t5/operating-system-openvms/lan-failover/m-p/5048541#M54678 Thanks - we just upgraded to 7.3-2. But I am looking at deploying some new itaniums on 8.3 so was looking into best redundancy. Tue, 22 May 2007 17:37:28 GMT https://community.hpe.com/t5/operating-system-openvms/lan-failover/m-p/5048541#M54678 Peter Zeiszler 2007-05-22T17:37:28Z