topic Job header page double spaces on landscape queue in Operating System - OpenVMS

Job header page double spaces on landscape queue

MarkW_1 — Tue, 10 May 2005 15:03:44 GMT

Landscape queue is built on and Openvms 7.3 with multinet 4.4. The data for the queue well but the job header page double space. Here is the module and form.

PE&l1H\f&l5C&l0S&l5H&l2a1O(s0p16.67h0T\

Form name Number Description
--------- ------ -----------
HPLS (stock=LAND_SIM3) 400 HP8150 Landscape Simplex
/LENGTH=66 /MARGIN=(LEFT=2) /SETUP=(H-LAND_SIM3) /STOCK=LAND_SIM3 /TRUNCATE
/WIDTH=180

The double spacing causes the header to print a 2 pages.

Re: Job header page double spaces on landscape queue

Doug Phillips — Tue, 10 May 2005 16:05:24 GMT

Mark,

Try /NOTRUNCATE /NOWRAP on your form. You might be getting a line wrap.

-Doug

Re: Job header page double spaces on landscape queue

Doug Phillips — Tue, 10 May 2005 16:29:24 GMT

Oh, and unless one of the other esc-sequences I don't recognize does this, you should set the Line Spacing to 8 LPI ( &l8D ) or /LENGTH=66 might be a problem.

-Doug again;-)

Re: Job header page double spaces on landscape queue

Phil.Howell — Tue, 10 May 2005 19:29:36 GMT

Try setting the /width to 255 and /nowrap
This is the module used on a laserjet 4 for many years, but I can't recall the details of what each parameter means
The form involved also had /length=70 and /margin=bottom=0 fwiw
&l0H
&l1x1o26a1e50f1H
*t300R
(0N
(s4099T
(s0B
(s0S
*p225X
*p62Y

Phil