topic Re: UCX 5.0A ECO2 Installation procedure. in Operating System - OpenVMS

UCX 5.0A ECO2 Installation procedure.

Anjan Ganguly — Thu, 24 Jun 2010 08:02:11 GMT

I have one CD for Open VMS 7.2-1 Layered Products.From there I want to install the TCPIP Alpha Version 5.0A ECO2.Can anybody tell me what are the commands and procedures to do this.I am able to mount the CD but not able to enter into it.As a result I am not able to search the kit in proper directory of in the CD ROM.

Re: UCX 5.0A ECO2 Installation procedure.

Joseph Huber_1 — Thu, 24 Jun 2010 08:18:08 GMT

>>
but not able to enter into it.
<<

What does this mean ?
If the CD is mounted, then You can DIRECTORY, COPY, PRODUCT INSTALL, @sys$update:VMSINSTAL etc. using the CD as the source directory specification.

To find out where the UCX kit is on the CD, do a directory list on dev:[000000]
See if there is a directory named UCX*, or a directory like [KITS],
I don't have one at hand to look what it is actually called.

Re: UCX 5.0A ECO2 Installation procedure.

P Muralidhar Kini — Thu, 24 Jun 2010 08:20:49 GMT

Hi Anjan,

For UCX/TCPIP installation procedure, refer -

* DIGITAL TCP/IP Services for OpenVMS, Installation and Configuration
http://h30266.www3.hp.com/odl/vax/network/tcpipv42/install/6524pro.html

Hope this helps.

Regards,
Murali

Re: UCX 5.0A ECO2 Installation procedure.

Joseph Huber_1 — Thu, 24 Jun 2010 08:37:08 GMT

VMS/Alpha 7.2 comes with TCPIP 5.0
On the system installation CD1 I see:

dir dqa0:[TCPIP_ALPHA050]

Directory DQA0:[TCPIP_ALPHA050]

DOCUMENTATION.DIR;1 KIT.DIR;1

dir dqa0:[TCPIP_ALPHA050.kit]

Directory DQA0:[TCPIP_ALPHA050.KIT]

DEC-AXPVMS-TCPIP-V0500-9-1.PCSI;1
DEC-AXPVMS-UCX-V0402-21PLACEHOLDER-1.PCSI;1

So the installation is done by:
PRODUCT INSTALL TCPIP /source=DQA0:[TCPIP_ALPHA050.KIT]

And the installation manual in [TCPIP_ALPHA050.DOCUMENTATION]

This installs TCPIP 5.0,
ECOs You have to download from the ITRC patch site, see the link on this page below.

Re: UCX 5.0A ECO2 Installation procedure.

Joseph Huber_1 — Thu, 24 Jun 2010 08:43:09 GMT

and BTW, the volume is ALPHA072 (the 1 of 2), not ALPHA072LP !

Re: UCX 5.0A ECO2 Installation procedure.

Shriniketan Bhagwat — Thu, 24 Jun 2010 08:49:21 GMT

Hi Anjan,

Belo link explains how to install and configure the DIGITAL TCP/IP for OpenVMS (UCX) layered application product and the programmer s guide. May be helpful.

http://h30266.www3.hp.com/odl/vax/network/tcpipv42/install/6524pro.html
http://www.process.com/tcpip/tcpware58docs/html/programmer/ch02.htm

Regards,
Ketan

Re: UCX 5.0A ECO2 Installation procedure.

Shriniketan Bhagwat — Thu, 24 Jun 2010 09:40:52 GMT

Hi Anjan,

>> I am able to mount the CD but not able to enter into it.
Are you able to do dir on the CD? If you are able to do dir on the CD then you can install the kit using the below command.

$ PRODUCT INSTALL TCPIP /source=
Hope this resolves your issue.

Regards,
Ketan

Re: UCX 5.0A ECO2 Installation procedure.

Anjan Ganguly — Thu, 24 Jun 2010 09:54:38 GMT

I mean to say that can u please tell me the commands to mount the CD rom and check for what are the directories available in the CD rom?

Re: UCX 5.0A ECO2 Installation procedure.

Joseph Huber_1 — Thu, 24 Jun 2010 10:11:50 GMT

Initially You wrote You were able to mount the CD ?
The Cd can be mounted like any other disk on the system.
So let dev: be the CD ROM device (DQxn: for IDE,DKxn: for SCSI), then
MOUNT dev: ALPHA072
(ALPHA072 is the volume label, it is written on the CD)
Then to get the "root" directory:
DIRECTORY dev:[000000]
And for the specific TCPIP kit see the directory names I have written in my earlier reply.

Re: UCX 5.0A ECO2 Installation procedure.

Shriniketan Bhagwat — Thu, 24 Jun 2010 10:13:41 GMT

Hi Anjan,

You can use the below command to mount the CD on VMS.

$ mount/over=id
$ dir :[000000]

Refer below link for more detains on mount.
http://www.kednos.com/conan?key=MOUNT~Examples&title=VMS%20Help&referer=

Hope this helps.

Regards,
Ketan

Re: UCX 5.0A ECO2 Installation procedure.

Anjan Ganguly — Thu, 24 Jun 2010 10:37:19 GMT

I am not able to do a Dir after mounting the CD Rom.If I do a show dev the it show that dqb0 (the CD rom drive) is mounted.

Re: UCX 5.0A ECO2 Installation procedure.

Joseph Huber_1 — Thu, 24 Jun 2010 10:58:19 GMT

And would You be willing to tell us the exact command and error message of the directory command ?

Re: UCX 5.0A ECO2 Installation procedure.

P Muralidhar Kini — Thu, 24 Jun 2010 11:35:33 GMT

Hi Anjan,

>> I am not able to do a Dir after mounting the CD Rom.
Give us the output of the MOUNT and the DIR command.

In continuation to the previous thread of yours
http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1435426
Where did you eventually find the UCX 5.0A-ECO2 version ?

Also,
Refer the following link which says how you can thank the forum -
http://forums13.itrc.hp.com/service/forums/helptips.do?#28

Regards,
Murali

Re: UCX 5.0A ECO2 Installation procedure.

Anjan Ganguly — Thu, 24 Jun 2010 11:38:15 GMT

Now I am able to mount and go to dqb0:[000000] directory.But not able to find any directory named dqb0:[TCPIP_ALPHA050].It says error opening directory.Directory not found.

Re: UCX 5.0A ECO2 Installation procedure.

Steven Schweda — Thu, 24 Jun 2010 12:15:54 GMT

"Not able" is not a useful problem
description. It does not say what you did.
It does not say what happened when you did
it.

> I have one CD for Open VMS 7.2-1 Layered
> Products. [...]

What does the label say? I have nine CDs in
my "OpenVMS [tm] Alpha Software Product
Library".

> [...] not able to find any directory named
> dqb0:[TCPIP_ALPHA050] [...]

Is that the only thing you looked for? On
my CD ("AXPBINMAR001"):

ALP $ dir cd1:[000000]*tcpip*
%DIRECT-W-NOFILES, no files found

ALP $ dir cd1:[000000]*ucx*

Directory ALP$DKA600:[000000]

UCXAXPA050.DIR;1

ALP $ dir cd1:[UCXAXPA050...]

Directory ALP$DKA600:[UCXAXPA050]

DOCUMENTATION.DIR;1 KIT.DIR;1

Total of 2 files.

Directory ALP$DKA600:[UCXAXPA050.DOCUMENTATION]

UCXAXPA050_COVER.PS;1 UCXAXPA050_COVER.TXT;1
UCXAXPA050_IGUIDE.PS;1 UCXAXPA050_IGUIDE.TXT;1
UCXAXPA050_SPD.PS;1 UCXAXPA050_SPD.TXT;1

Total of 6 files.

Directory ALP$DKA600:[UCXAXPA050.KIT]

DEC-AXPVMS-TCPIP-V0500-11-1.PCSI;1

Total of 1 file.

Grand total of 3 directories, 9 files.

Sometimes a little imagination can be useful.

Re: UCX 5.0A ECO2 Installation procedure.

RBrown_1 — Thu, 24 Jun 2010 12:21:05 GMT

>>>>Now I am able to mount and go to dqb0:[000000] directory.But not able to find any directory named dqb0:[TCPIP_ALPHA050].<<<<

When you did DIRECTORY DQB0:[000000], did it list TCPIP_ALPHA050.DIR? Show us!

Are you using the right CD? UCX / TCPIP never used to be on the layered products CD --- It used to be on the operating CD. Another poster (Joseph?) also said you need to look on the ALPHA072 CD. Show us the output of

$ SHOW DEVICE DQB0:

Re: UCX 5.0A ECO2 Installation procedure.

Steven Schweda — Thu, 24 Jun 2010 12:24:41 GMT

> [...] From there I want to install the
> TCPIP Alpha Version 5.0A ECO2. [...]

Why do you believe that your (old?) CD-ROM
contains TCPIP V5.0A ECO2?

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1435426

> Why that particular ECO? [...]

Still wondering.

Every version of TCPIP which I've ever seen
could use considerable improvement, and newer
versions and ECOs tend to be better than
older ones. Please explain why are you not
trying to install the latest version+ECO
which is compatible with your VMS version.

Re: UCX 5.0A ECO2 Installation procedure.

Steven Schweda — Thu, 24 Jun 2010 12:33:30 GMT

> [...] UCX / TCPIP never used to be on the
> layered products CD [...]

What is "the layered products CD"? "DIGITAL
TCP/IP Services for OpenVMS[TM] Version 5.0A"
is certainly in my March 2000 SPL CD
collection. (It's on CD 1.)

> [...] It used to be on the operating CD.

Yes, it's normally there, too.

Re: UCX 5.0A ECO2 Installation procedure.

Joseph Huber_1 — Thu, 24 Jun 2010 13:00:17 GMT

In my earlier reply I showed the 7.2 operating system CD1, but now realize Anjan has 7.2-1:
the system CD set consists of 2 CDs labelled
"OpenVMS Alpha V7.2-1 Operating System"
The volume label is ALPHA0721
and it contains directory [TCPIP_ALPHA050A].

the second CD is labelled
"OpenVMS Alpha V7.2-1 Layered Products" , volume label ALPHA0721LP.

The latest TCPIP version running on VMS7.2-1 is probably 5.2; TCPIP 5.3 runs from VMS7.2-2 upwards.
(TCPIP5.2 I don't know for sure, there are no downloadable patches on the ITRC side, only patches for 5.1 and 5.3).

Re: UCX 5.0A ECO2 Installation procedure.

Shriniketan Bhagwat — Thu, 24 Jun 2010 13:43:58 GMT

Hi Anjan,

>> But not able to find any directory named dqb0:[TCPIP_ALPHA050].

What does the dir output specify? Do you see anything in the CD? Are you using correct CD? Please provide the output of below command.
$ dir dqb0:[000000â ¦]
$ show dev dqb0:

Regards,
Ketan