topic Re: New to Samba, getting error code 1326 in Operating System - OpenVMS

New to Samba, getting error code 1326

kent ehrman — Thu, 05 Aug 2010 22:02:00 GMT

I just installed Samba for VMS, configured as a standalone. Using testparam I get "Loaded
services file OK." and I can see the share that I added to smb.conf.

I used smba$manage_cifs to create a user and password.

From the DOS> prompt I enter "net use u: \\rx2600\salesmgr" then enter username and password that when I get "system error 1326 has occurred" logon failure: unknown user or bad password.

Has anyone seen this before or any ideas?

Re: New to Samba, getting error code 1326

John Gillings — Thu, 05 Aug 2010 22:15:50 GMT

Kent,

I find this stuff very confusing in Windows environments, trying to work out where and how the username and password are resolved. Is your client PC in a domain? What is the exact text of the username you entered (are you specifying a domain name?).

Are there any log entries on the OpenVMS system showing a login failure?

Is the OpenVMS system configured for case sensitivity?

Re: New to Samba, getting error code 1326

Shriniketan Bhagwat — Fri, 06 Aug 2010 03:12:30 GMT

Hi Kent,

Does the user account used exist on Windows box? I did the quick search on the net and found lots of references for the error what your getting and the typical cause for them. You may want to search and refer them. Below is the link to samba documentation.
http://www.samba.org/samba/docs/

Regards,
Ketan

Re: New to Samba, getting error code 1326

Paul Nunez — Sat, 07 Aug 2010 12:39:22 GMT

Hi,

What version of CIFs is it? Prior to the current version (1.2), when OVMS CIFS is configured as a Standalone server, you must include the server name when specifying the username, in the format:

servername\username

net use u: \\rx2600\salesmgr /user:rx2600\username *

But it's no longer required in v1.2. You can get v1.2 at:

http://h71000.www7.hp.com/network/cifs_download.html

Regards,

Paul

Re: New to Samba, getting error code 1326

Shilpa K — Mon, 09 Aug 2010 12:29:01 GMT

Hi Kent,

Please try the following steps and see if the problem goes away:

1. Login to VMS system using a privileged VMS user account

2. Execute:

$ @samba$root:[bin]samba$define_commands.com

3. Change user password by executing:

$ smbpasswd
New SMB password:
Retype new SMB password:

3. Verify that the login works:

$ smbclient --list --user \
Password:

For example, to login using cifsadmin account in a CIFS domain PIANODOM on a VMS system PIANO, execute:

$ smbclient --list piano --user TESTDOM\cifsadmin
Password:

If the smbclient is working fine, then try login from the windows system and see if it goes fine.

Thanks,
Shilpa