topic Re: SMTP mailserver in Operating System - OpenVMS

SMTP mailserver

J.H.Knigge — Mon, 02 Jun 2003 11:05:32 GMT

How can I change our SMTP mailserver in OpenVMS
(with UCX 4.1)

Re: SMTP mailserver

Gary Sachs — Mon, 02 Jun 2003 15:41:26 GMT

If you're asking how to make config changes to your SMTP server look at SET CONFIG SMTP in UCX. at least that's the command in TCPI(UCX) 5.x. You may wish to look at, I believe, SYS$MANAGER:UCX$CONFIG.COM as well.

Re: SMTP mailserver

Nigel Wright_1 — Thu, 18 Sep 2003 09:01:27 GMT

I am not sure what u want to change.

ucx set config smtp

is the most used command

disable smtp then do enable to see the changes.
Also a stop and start mail might be required.

We use it to forward VMS mail to an Exchange email server.

Re: SMTP mailserver

Martin P.J. Zinser — Thu, 18 Sep 2003 13:12:07 GMT

To first look at the config use

ucx show config smtp

Depending how familiar you are with UCX also

ucx help set config smtp

might be usefull.

Now in case you do refer to other actions by
change:

1.) To "upgrade" SMTP you have to upgrade UCX,
which nowadays is called TCP/IP services. Current version is 5.3 ECO 2. Lots of functionality has been added since 4.2. The upgrade is well worth the effort.

2.) To "replace" UCX SMTP with another product (like PMDF or MX). Inovke sys$manager:ucx$config.com and disable the UCX SMTP service.

Re: SMTP mailserver

Willem Grooters — Thu, 18 Sep 2003 18:52:12 GMT

Adding one thing to Martin:
One advantage on TCPIP 5.3 (probably in 5.1 as well, I'm not sure) is that you will be able to define your SMTPserver to be a realy host for your network only - keeping SPAMmers out.
I would consider this a requirement if you want to relay incoming and outgoing mail between the Internet and your network. I don't know for the other mailhandlers but no doubt they have similar facilities.