topic Re: TCP parameters on OpenVMS7.1 in Operating System - OpenVMS

TCP parameters on OpenVMS7.1

nos. — Fri, 14 Nov 2003 03:12:02 GMT

How can i list tcp parameter such as keepalive time, keepidle time on OpenVMS7.1?

Thank you so much.

Re: TCP parameters on OpenVMS7.1

Åge Rønning — Fri, 14 Nov 2003 03:45:40 GMT

TCPIP SHOW PROTOCOL TCP
TCPIP SHOW PROTOCOL TCP/PARAM

Re: TCP parameters on OpenVMS7.1

Lokesh_2 — Fri, 14 Nov 2003 03:47:05 GMT

Hi,

$sho logical ucx*/table=*
or
$sho logical tcpip*/table=*

will show you the things you want to know about TCPIP parameters. If logical is not defined, then default value is set.

Best regards,
Lokesh

Re: TCP parameters on OpenVMS7.1

Åge Rønning — Fri, 14 Nov 2003 03:50:01 GMT

$ @sys$startup:tcpip$define_commands
$ sysconfig -q inet

Re: TCP parameters on OpenVMS7.1

Lokesh_2 — Fri, 14 Nov 2003 04:06:22 GMT

Hi,

Sorry I was wrong. Age is right.
I thought about other timeout stuff like bind timeout, telnetsym idle timeout..etc.

excuse me,
Lokesh

Re: TCP parameters on OpenVMS7.1

Ian Miller. — Fri, 14 Nov 2003 07:19:48 GMT

if you are familiar with the unix netstat command then (after you have @SYS$STARTUP:TCPIP$DEFINE_COMMANDS) you can use netstat command to inspect and change parameters. See UCX HELP NETSTATA